CYLINDER GP-HOIST 1437678 - Caterpillar

Warning signs and labels
There are several specific safety messages on this machine. The exact location of the messages and the description of the messages are reviewed in this section. Please become familiarized with all safety messages.* Make sure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if you cannot read the words. Replace the illustrations of the illustrations are not legible.* When you clean the safety messages, use a cloth, water, and soap. Do not use solvent, gasoline, or harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. Loose adhesive will allow the safety message to fall.* Replace any safety message that is damaged, or missing. If a safety message is attached to a part that is replaced, install a safety message on the replacement part. Any Caterpillar dealer can provide new safety messages.Location of warning label for lifting operation
1. Precaution for lifting operation
This warning label is positioned in the right side of the cab.For the lifting operation, it is important to operate this machine in the correct way. Failure to operate the machine in the correct way could result in serious personal injury or death. Be sure to observe the following precautions.2. Lifting operation in accordance with rated load table Please make lifting operation on the basis of the rated load table.Never travel with the objects lifted
Never travel with the object lifted, or the turnover of shaken objects could result in personal injury.Never pull the objects on the ground
The lifting operation to pull the objects front/rear, bias and laterally on the ground can cause the turnover of the machine, the breakage of wire rope and falling of the objects resulting in personal injury.Never make lifting operation on a slope
The lifting operation on a slope of 5 degrees of more, or on any soft ground can cause the turnover of the machine and falling of the objects resulting in personal injury. Make sure that the machine is on the solid level ground and make lifting operation. Lay a steel plate on the soft ground.Never use the machine except for one with the standard specification
Never use the machine except for one with the standard specification because the lifting load and the working range are not correctly shown.Never make sudden lifting-operation
The sudden lifting operation can cause a breakage of the hook because the excessive force acts on the hook resulting in serious personal injury. Never make sudden lifting-operation.
Never make quick swing operation with the objects lifted
1. The quick swing operation with the objects lifted can cause the turnover of the machine because the centrifugal force pulls the objects outside. Never make quick swing operation with the objects lifted.2. Quick stop after quick swing or quick lower operation of the hook may cause a trouble that wire rope comes off the hook latch. Never make operation like these.
Factors to a trouble that wire rope comes off
1) Usual condition.2) If the