1475456 CYLINDER HEAD GP Caterpillar parts
3056
Rating:
Alternative (cross code) number:
CA1475456
147-5456
1475456
CA1475456
147-5456
1475456
GEN SET ENGINE,
Compatible equipment models: 1475456:
Number on catalog scheme:
For full view, you need register
Information:
Test Preparation
Drive the machine to a smooth, horizontal surface.
Illustration 2 g06182706
Move propel lever (1) to the NEUTRAL position.
Illustration 3 g06182711
Move parking brake switch (2) to the ON position.
Illustration 4 g06182714
Move throttle lever (3) to the LOW-IDLE position.
Operate the engine for at least 5 minutes.
Illustration 5 g06182717
Move engine start switch (4) to the OFF position.
Illustration 6 g06183949
Front motor
Disconnect brake hose (5) from the front propel motor. Hand tighten Tool (B) on the port, and then loosen the cap one half turn to allow chamber venting. Use Tool (C) to plug the hose assembly.
Illustration 7 g06183951
Rear motor
Disconnect brake hose (6) from the rear propel motor. Hand tighten Tool (B) on the port, and then loosen the cap one half turn to allow chamber venting. Use Tool (C) to plug the hose assembly.
Illustration 8 g06257131
Unhook latch (8) on each side of the machine, and open engine hood (7).
Install the hood prop rod, on the right side of the engine compartment.
Illustration 9 g06257135
Some components removed for clarity.
Remove the cap and connect one Tool (A2) to the reverse pressure tap in port "Ma" (9).
Remove the cap and connect one Tool (A2) to the forward pressure tap in
Drive the machine to a smooth, horizontal surface.
Illustration 2 g06182706
Move propel lever (1) to the NEUTRAL position.
Illustration 3 g06182711
Move parking brake switch (2) to the ON position.
Illustration 4 g06182714
Move throttle lever (3) to the LOW-IDLE position.
Operate the engine for at least 5 minutes.
Illustration 5 g06182717
Move engine start switch (4) to the OFF position.
Illustration 6 g06183949
Front motor
Disconnect brake hose (5) from the front propel motor. Hand tighten Tool (B) on the port, and then loosen the cap one half turn to allow chamber venting. Use Tool (C) to plug the hose assembly.
Illustration 7 g06183951
Rear motor
Disconnect brake hose (6) from the rear propel motor. Hand tighten Tool (B) on the port, and then loosen the cap one half turn to allow chamber venting. Use Tool (C) to plug the hose assembly.
Illustration 8 g06257131
Unhook latch (8) on each side of the machine, and open engine hood (7).
Install the hood prop rod, on the right side of the engine compartment.
Illustration 9 g06257135
Some components removed for clarity.
Remove the cap and connect one Tool (A2) to the reverse pressure tap in port "Ma" (9).
Remove the cap and connect one Tool (A2) to the forward pressure tap in
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
1195436
CYLINDER GP-STICK
312B, 312B L, 312C L, 313B
312B, 312B L, 312C L, 313B
2000614
CYLINDER HEAD GP
G3408
G3408
2000609
CYLINDER HEAD GP
G3408
G3408
1986528
CYLINDER HEAD GP
G3408, G3408C
G3408, G3408C
1807995
CYLINDER HEAD GP
G3408
G3408
1618994
CYLINDER HEAD GP
G3408
G3408
1993206
CYLINDER HEAD AS
G3408
G3408