CYLINDER GP-COUNTERWEIGHT 1505913 - Caterpillar

Marine Engines:
3412E (S/N: 9KS1-UP; 9PW1-UP)
The oil level gauge calibration chart for the 3412E Marine Engine has been revised. The previous chart is currently published in Operation and Maintenance Manual, SEBU7178-00, "Engine Oil Level Gauge - Calibrate" for the 3412E Marine Engine. The charts for the shallow sump are correct, but the charts for the deep sump are incorrect. The same information is also published in Product News, LEXM9435-00 for the 3412E Marine Engine. Both publications are being revised currently. The new calibration charts are shown below.
Table 1
3412E Marine Engine
Oil Level Gauge Calibration
Deep Sump
Left Hand Service    
Angle (1)     (X) "ADD" Mark     (Y) "FULL" Mark    
15 degrees    
202 mm (8.0 inch)    
263 mm (10.4 inch)    
14 degrees    
200 mm (7.9 inch)    
259 mm (10.2 inch)    
13 degrees    
197 mm (7.8 inch)    
253 mm (10.0 inch)    
12 degrees    
193 mm (7.6 inch)    
246 mm (9.7 inch)    
11 degrees    
191 mm (7.5 inch)    
240 mm (9.4 inch)    
10 degrees    
187 mm (7.4 inch)    
235 mm (9.3 inch)    
9 degrees    
183 mm (7.2 inch)    
230 mm (9.1 inch)    
8 degrees    
178 mm (7.0 inch)    
223 mm (8.8 inch)    
7 degrees    
173 mm (6.8 inch)    
219 mm (8.6 inch)    
6 degrees    
168 mm (6.6 inch)    
213 mm (8.4 inch)    
5 degrees    
164 mm (6.5 inch)    
208 mm (8.2 inch)    
4 degrees    
159 mm (6.3 inch)    
203 mm (8.0 inch)    
3 degrees    
155 mm (6.1 inch)    
195 mm (7.7 inch)    
2 degrees    
151 mm (5.9 inch)    
192 mm (7.6 inch)    
1 degree    
145 mm (5.7 inch)    
186 mm (7.3 inch)    
0 degrees    
139 mm (5.5 inch)    
183 mm (7.2 inch)    
-1 degree    
132 mm (5.2 inch)    
179 mm (7.0 inch)    
-2 degrees    
129 mm (5.1 inch)    
175 mm (6.9 inch)    
-3 degrees    
124 mm (4.9 inch)    
170 mm (6.7 inch)    
-4 degrees    
120 mm (4.7 inch)    
166 mm (6.5 inch)    
-5 degrees    
116 mm (4.6 inch)    
161 mm (6.3 inch)    
-6 degrees    
110 mm (4.3 inch)    
157 mm (6.2 inch)    
-7 degrees    
105 mm (4.1 inch)    
153 mm (6.0 inch)    
-8 degrees    
101 mm (4.0 inch)    
148 mm (5.8 inch)    
-9 degrees    
97 mm (3.8 inch)    
143 mm (5.6 inch)    
-10 degrees    
92 mm (3.6 inch)    
139 mm (5.5 inch)    
-11 degrees    
87 mm (3.4 inch)    
136 mm (5.4 inch)    
-12 degrees    
84 mm (3.3 inch)    
133 mm (5.2 inch)    
-13 degrees    
78 mm (3.1 inch)    
130 mm (5.1 inch)    
-14 degrees    
76 mm (3.0 inch)    
127 mm (5.0