CYLINDER HEAD GP 1535721 - Caterpillar

Illustration 1 g00592288
(1) 163-3747 Sleeve Bearing Quantity ... 2 Outside diameter ... 95.102 .011 mm (3.7442 0.0004 inch) Inside diameter ... 80.120 0.020 mm (3.1543 0.0008 inch) (2) Torque for fitting ... 9 5 N m (7 4 lb ft) (3) The position that is shown is for the slits in the seal. (4) The position that is shown is for the slit in the rings. (5) Torque for 12 bolts ... 367 55 N m (270 41 lb ft) (6) Torque for locknut ... 11900 600 N m (8777 443 lb ft) (7) Torque for setscrew ... 57 10 N m (42 7 lb ft)After tightening the socket setscrew (7) , stake the socket setscrew in two places. (8) Rod Diameter of rod ... 100 mm (3.9 inch) Minimum thickness for plating ... 0.03 mm (.001 inch) (9) Bore of head ... 100 mm (3.9 inch) (10) Bore of cylinder ... 140 mm (5.5 inch) (11) In order to remove the air during installation of seal, fill the clearances with grease.Stick Cylinder Drift (New Cylinder) Maximum allowable drift in five minutes ... 10 mm (0.39 inch) Hydraulic oil temperature ... 55° 5°C (131° 9°F) Load on bucket ... No load