CYLINDER-HYD 1537975 - Caterpillar

When the blade has been equipped with the AccuGrade elevation sensors, care must be taken when you are moving the circle and/or the blade to the maximum positions (left or right).Damage may occur to the sensors and/or the coiled cable harnesses that are associated with the sensors when the blade and/or the circle are moved to the maximum position (left or right).
Setting the Required Cross Slope
When set on automatic mode, a cross slope system drives the blade to a predefined cross slope. Complete the following steps in order to set the required cross slope on the Display:
Toggle the "Elevation Select" Switch to the side that will be manually controlled for elevation.
Enter the required slope by toggling the "Menu Scroll" Switch (2,3) that is located on the side that is controlling cross slope. Make sure that the slope angle is positioned correctly by using the Slope Direction Switch (6) .
Press the "Auto/Manual" button on the side of the machine that is Cross Slope controlled in order to place the system in the automatic mode. The "Auto/Manual" Light Emitting Diode (Led) (4) changes from amber to green.