CYLINDER GP-BUCKET 1624673 - Caterpillar

1624673 CYLINDER GP-BUCKET Caterpillar parts 315

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1624673
162-4673
1624673

Weight: 220 pounds 99 kg.

Information:

BORE DIAMETER 100 mm

CLOSED LENGTH 1491 mm

PIN SIZE CAP END 70 mm

PIN SIZE ROD EYE 80 mm

ROD DIAMETER 70 mm

STROKE 1048

TYPE THD GLAND

Buy CYLINDER GP-BUCKET 1624673 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

This part in 2 request: Show. This information for suppliers only!

#515247 1624673

2020-08-25

#216907 1624673

2018-09-28

Compatible equipment models: 1624673:

EXCAVATOR 315 Caterpillar

Number on catalog scheme: 2

Caterpillar 1624673 Parts scheme CYLINDER GP-BUCKET

For full view, you need register

Information:

Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01335247
Typical example
(1) Screws for the breather cover
(2) Breather cover
(3) Spring
(4) Diaphragm and plate
(5) Spacer for turbocharged engines only
(6) Joint for turbocharged engines only
(7) Cavity
(8) Vent hole
Loosen the screws (1) and remove the breather cover (2) from the valve mechanism cover.
Remove the spring (3). Remove the diaphragm and plate (4).
For turbocharged engines, remove the spacer (5) and the joint (6).
Clean the vent hole (8) and the cavity (7) in the valve mechanism cover.
Make sure that the components of the breather assembly are installed correctly. Engine damage may occur if the breather assembly is not working correctly.
For turbocharged engines, install a new joint (6) and the spacer (5).
Install a new diaphragm and plate (4) for the breather assembly into the cavity (7) of the valve mechanism cover or the spacer (5) for turbocharged engines.
Install a new spring (3).
Install the breather cover (2) and the four screws (1). Tighten the screws.