1646099 CYLINDER HEAD GP Caterpillar parts
3056
Rating:
Alternative (cross code) number:
CA1646099
164-6099
1646099
CA1646099
164-6099
1646099
Weight: 105 pounds 47 kg.
INDUSTRIAL ENGINE,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 1646099:
Information:
Illustration 4 g03380693
Unhook latch (9) and open the engine compartment.
Illustration 5 g03380695
Remove locking pin (11). Raise support bar (10). Lock the support bar in position with the locking pin.
Illustration 6 g03380695
Illustration 7 g03380795
Illustration 8 g03380797
Remove bolts (13) with washers, and remove left side panel (12) .
Illustration 9 g03380798
Remove nut and washer from under direction control lever (14). Disconnect servo link (15) from lever.
Illustration 10 g03380801
Remove cotter pin and pin (18) from direction control lever (17). Disconnect cable (16) from the direction control lever.
Illustration 11 g03380805
Remove the plug from port "X1" (19) of the drum pump. Install Tool (D) in port "X1".
Remove the plug from port "X2" (20) of the drum pump. Install second Tool (D) in port "X2".
Assemble the tooling. Connect Tool (B) to Tool (C). Make two sets of tools.
Connect one Tool (C) to the tap in port "X1" (19). Connect second Tool (C) to the tap in port "X2" (20) .
Move engine start switch (5) to the START position. Release the switch when the engine starts.
Operate the engine at low idle for a few minutes. Move throttle control switch (3) to the HIGH IDLE position.
Monitor the hydraulic oil temperature with Tool (G). Operate the machine until the oil temperature reaches 49 6 °C (120 10 °F).
Move