1668135 CYLINDER AS Caterpillar parts
416C, 420D, 428C, 430D
Rating:
Alternative (cross code) number:
CA1668135
166-8135
1668135
CA1668135
166-8135
1668135
Weight: 60 pounds 27 kg.
Information:
BEARING TYPE
SLEEVE
BORE DIAMETER
95.25
mm
GREASE PORT
Y
MOUNT TYPE
EYE
TYPE
1
BACKHOE LOADER,
Related part:
1668135
CYLINDER AS-HYD
10R0641
R
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Plug and cap all open ports and tube assemblies.
Illustration 1 g06326330
Remove bolts (2), tube assembly (1), and the gaskets.
Illustration 2 g06326331
Illustration 3 g06326383
Remove banjo bolt (4), bolt (3), and tube assembly (5).
Remove O-ring seals (6) and (7) from tube assembly (5).
Illustration 4 g06326332
Remove nuts (8) and turbocharger (9) from the exhaust manifold.Note: Ensure that the weight of the turbocharger is supported as the nuts are removed.
Illustration 5 g06326333
If necessary, remove studs (10) from the exhaust manifold.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Plug and cap all open ports and tube assemblies.
Illustration 1 g06326330
Remove bolts (2), tube assembly (1), and the gaskets.
Illustration 2 g06326331
Illustration 3 g06326383
Remove banjo bolt (4), bolt (3), and tube assembly (5).
Remove O-ring seals (6) and (7) from tube assembly (5).
Illustration 4 g06326332
Remove nuts (8) and turbocharger (9) from the exhaust manifold.Note: Ensure that the weight of the turbocharger is supported as the nuts are removed.
Illustration 5 g06326333
If necessary, remove studs (10) from the exhaust manifold.
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
416C, 416D, 420D, 424D, 426C, 428C, 430D, 436C
416C, 426C, 436C
416C
416C, 416D, 420D, 426C, 430D, 436C, 769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 784C, 785C, 785D, 834K...
416D, 420D, 424D, 428D, 430D, 432D, 438D, 442D
416D, 420D, 428D, 432D, 438D, 442D
416D, 420D, 430D
416D, 420D, 430D
416D, 420D
416D, 420D, 424D, 428D, 430D, 432D, 438D, 442D
416D, 420D, 424D, 428D, 432D, 438D, 442D
414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 442D, 442E
1917712
CYLINDER AS
426C, 430D, 436C
426C, 430D, 436C
1545502
CYLINDER AS
426C, 430D, 436C
426C, 430D, 436C
1668138
CYLINDER AS
426C, 436C, 438C
426C, 436C, 438C
1668137
CYLINDER AS
426C, 436C, 438C
426C, 436C, 438C
1942155
CYLINDER GP-GRAPPLE
TH220B, TH330B, TH62, TH82
TH220B, TH330B, TH62, TH82
1865845
CYLINDER GP-GRAPPLE
TH220B, TH330B, TH62, TH82
TH220B, TH330B, TH62, TH82
1974830
CYLINDER GP-GRAPPLE
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH62, TH63, TH82, TH83
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH62, TH63, TH82, TH83
1973617
CYLINDER GP-GRAPPLE
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH62, TH63, TH82, TH83
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH62, TH63, TH82, TH83
1639250
CYLINDER AS
446B
446B
1668136
CYLINDER AS
416C, 420D, 428C, 430D, 432D, 438C, 438D, 442D
416C, 420D, 428C, 430D, 432D, 438C, 438D, 442D