CYLINDER AS 1699528 - Caterpillar

Removal Procedure
Start By:
Separate the transmission from the engine. Refer to Disassembly and Assembly, "Engine, Torque Converter, and Transmission - Separate".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01843618
Remove retaining ring (1) and retaining ring (2). Remove bearing assembly (3) and output shaft (4).
Illustration 2 g01843638
Remove bolts (5) and cover (6).
Illustration 3 g01843639
Remove O-ring seal (7).
Illustration 4 g01843642
Remove magnetic filter (8) and screen (9).
Illustration 5 g01843733
Remove bolts (10) in order to remove guard (11).
Illustration 6 g01843774
Disconnect harness assemblies (12).
Illustration 7 g01844394
Remove bolts (13) and bolts (14). Remove oil pan (15).
Illustration 8 g01844416
Remove O-ring seals (16), O-ring seal (17), and seal (18).
Illustration 9 g01844421
Remove tube assembly (19) and tube assembly (20). Remove bolts (21) in order to remove housing (22).
Illustration 10 g01844423
Remove bolts (23) in order to remove gear pump (24).
Illustration 11 g01844433
Remove O-ring seal (25).