CYLINDER 1709835 - Caterpillar

Table 1
Item     Description     New Part Number     Former Part Number    
    Ball Bearing         1F-2771    
1     Ring     8S-6204        
2     Outer Race     8S-6203        
3     Roller Bearing     131-3919        Procedure
Illustration 1 g00854775
View of the 160-6401 Torque Converter Group (1) 8S-6204 Ring (2) 8S-6203 Outer Race (3) 131-3919 Roller Bearing Note: The assembly procedure for installing the three-piece roller bearing is different from the procedure used for the one piece ball bearing. In the listed reference material, replace Step 31 through Step 33 in the Assemble Torque Converter section with the following information.
Install 131-3919 Roller Bearing (3) onto the output shaft. The rounded corner on the inner race of the bearing should be installed down (away from the ring). Install the retaining ring.
Install the seal rings on the shaft.
Install 8S-6203 Outer Race (2) in the carrier. The lip on the outer race should be installed down. Install the shaft in the torque converter.Also, add the following information to Step 43.
Install 8S-6204 Ring (1). The sharp corner on the outside diameter should be installed down against 131-3919 Roller Bearing (3) .