1838174 CYLINDER HEAD AS Caterpillar parts
320B, 320C, 320C FM
Rating:
Alternative (cross code) number:
CA1838174
183-8174
1838174
CA1838174
183-8174
1838174
Weight: 59 pounds 26 kg.
EXCAVATOR,
You can buy:
US$750.69
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1838174 Cylinder Head AS-Front (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 73.92 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 73.92 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1838174 Cylinder Head AS-Front (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 73.92 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 73.92 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1838174 Cylinder Head AS-Front (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 73.92 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 73.92 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
This part in 2 request:
Show.
This information for suppliers only!
2017-01-11
2016-09-02
Number on catalog scheme:
4
For full view, you need register
Information:
Disassembly Procedure
Start By:
Remove the engine oil filter base.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00849489
Typical example
Remove three O-ring seals (6) from the oil filter base.
Remove relief valve assembly:
Loosen bolt (1) slowly in order to release the compression on the spring (3) .
Remove the following items from the oil filter base: bolt (1), seat of the relief valve spring (2), spring (3) and retainer (4) .
Remove spacer (5) from bolt (1) .
Illustration 2 g00849701
Typical example
Remove the two bolts and the washers that hold valve (11).
Remove valve (11) and O-ring seal (9) from oil filter base.
Remove the two bolts and the washers that hold cover (10) .
Remove the following items from the oil filter base: cover (10), O-ring seal (9), spring (8) and oil pump bypass valve (7) .
Illustration 3 g00850052
Typical example
Remove the following items from oil filter base: cover (12), O-ring seal (13), spring (14) and relief valve plunger (15) .
Remove the stud that holds the oil filter to the oil filter base, if necessary.
Start By:
Remove the engine oil filter base.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00849489
Typical example
Remove three O-ring seals (6) from the oil filter base.
Remove relief valve assembly:
Loosen bolt (1) slowly in order to release the compression on the spring (3) .
Remove the following items from the oil filter base: bolt (1), seat of the relief valve spring (2), spring (3) and retainer (4) .
Remove spacer (5) from bolt (1) .
Illustration 2 g00849701
Typical example
Remove the two bolts and the washers that hold valve (11).
Remove valve (11) and O-ring seal (9) from oil filter base.
Remove the two bolts and the washers that hold cover (10) .
Remove the following items from the oil filter base: cover (10), O-ring seal (9), spring (8) and oil pump bypass valve (7) .
Illustration 3 g00850052
Typical example
Remove the following items from oil filter base: cover (12), O-ring seal (13), spring (14) and relief valve plunger (15) .
Remove the stud that holds the oil filter to the oil filter base, if necessary.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
320C, 320C FM, 320C L, 321C
1390, 320B, 320C, 541, 551, 552, TK741, TK751, TK752
311, 312, 320B, 320C, 322B, 322B L, 322C, 322C FM, 325, 325B L, 325C
320B, 320C, 320C FM
320C, 325C, 330C L
320C, 321B, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
318B, 320B, OEMS
315C, 318C, 319C, 320C, 320C L, 321C
320B, 320C, 322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 345B II, 345B L
320 L, 320B, 321B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 539, M325B
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, OEMS
320B, 320C, 320C FM
1529757
CYLINDER & MTG GP-LIFT
844, 844H
844, 844H
3082464
CYLINDER GP-TILT
854G, 854K, D11R, D11T
854G, 854K, D11R, D11T
3082462
CYLINDER GP-TILT
854G, 854K, D11R, D11T
854G, 854K, D11R, D11T
2588661
CYLINDER GP-TILT
854G, D11R
854G, D11R
1540772
CYLINDER & SEAL GP-BUCKET
320B, 325B, 325B L
320B, 325B, 325B L
1183967
CYLINDER & SEAL GP-BUCKET
318B, 320B, 325B L
318B, 320B, 325B L
1183952
CYLINDER & LINES GP-STICK
320B, 320B FM LL
320B, 320B FM LL
1540771
CYLINDER & LINES GP-BUCKET
320B, 325B, 325B L
320B, 325B, 325B L
1232083
CYLINDER & LINES GP-BUCKET
320B, 320B FM LL, 325B
320B, 320B FM LL, 325B