CYLINDER & SEAL GP-STICK 1838876 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the engine oil into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g01201319
Remove bolts (1). Remove cover (2).
Illustration 2 g01201320
Remove O-ring seal (3) from cover (2).
Illustration 3 g01201321
Remove oil screen (4). Installation Procedure
Illustration 4 g01201321
Install oil screen (4).
Illustration 5 g01201320Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install O-ring seal (3) onto cover (2).
Illustration 6 g01201319
Position cover (2). Install bolts (1).
Fill the engine with oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".