CYLINDER & LINES GP-BUCKET 1850345 - Caterpillar

(1) Install equalizer bar with the side containing the part number and the word FRONT toward front of the machine.(2) Torque for four bolts ... 1825 175 N m (1340 130 lb ft)(3) Apply 6V-1541 Quick Cure Primer to these surfaces and permit to dry. Then, apply 7M-7456 Bearing Mount prior to installing the seals.(4) Apply light coating of oil being sealed to seal inside diameter before installing pin.(5) Apply 6V-1541 Quick Cure Primer to the inside bore of the equalizer bar and permit to dry. Then apply 7M-7456 Bearing Mount before installing bearing.(6) Apply 2P-2506 Anti-Seize Compound to front bore of equalizer bar saddle. Then apply 2P-2506 Anti-Seize Compound to rear surface of pin that makes contact with rear bore of equalizer bar saddle. Do not apply Anti-Seize Compound to bearing area.To fill end pin joint, add lubricant (90 W gear oil) through center port until oil exits either relief fitting. Refill after exercising tractor.
Section B-B
Section A-A