CYLINDER BLOCK GP 1889015 - Caterpillar

Illustration 9 g01079471
Install Tooling (A) and Tooling (B) to the cover. Fasten a suitable lifting device to Tooling (A) and Tooling (B). Remove bolts (22) .
Illustration 10 g01079473
Remove bolt (23). Remove the air filter assembly. The weight of the air filter assembly is approximately 68 kg (150 lb).
Illustration 11 g01079477
Remove bolts (24) .
Remove bolts (25). Remove plate (26) .
Remove bolts (27) and air cleaner (28) .Installation Procedure
Illustration 12 g01079477
Install air cleaner (28). Install bolts (27) .
Install plate (26) and bolts (25) .
Install bolt (24) .
Illustration 13 g01079471
Illustration 14 g01079473
Use Tooling (A), Tooling (B) and a suitable lifting device in order to install the air filter assembly. The weight of the air filter assembly is approximately 68 kg (150 lb). Install bolt (23) .
Install bolts (22). Remove Tooling (A) and Tooling (B) .
Illustration 15 g01079470
View from bottom of air cleaner
Install clips (21) .
Illustration 16 g01079468
Connect harness (18), tube (19), and clip (20) .
Illustration 17 g01079467
Install bolts (15) and clip (16) behind mat (17) (not shown).
Illustration 18 g01079466
Install U-bolts (12). Connect both ends of dryer (10). Install left guard (9) .
Install guard (14). Connect hose (11), dust ejector (8) and strip (13) .
Illustration 19 g01079465
Illustration 20 g01079504
Install Tooling (A) and a suitable lifting device to cover (4). The weight of cover (4) is approximately 29 kg (65 lb).
Install prop rod (7) and cover (4) .
Illustration 21 g01079464
Connect tube assembly (5) and clip (6) to cover (4) .
Illustration 22 g01079440
Install cover (1), cover (2), and bolts (3) on both sides.