CYLINDER GP-RIPPER 1926446 - Caterpillar

Weld 9EQ5169 Tapping Strips (1) in the positions shown in Illustration 1, Illustration 2 and Illustration 3.
Table 2
Item     Dimension    
W1    
6 mm (0.23 inch) Fillet Weld    Modifications to the Fire Suppression System (If Equipped)
Illustration 4 g01060518
Underside view of the hood assembly (1) 0DE5819 Hose As (2) 0DE4949 Hose As (X) Joins nozzle on left side of rear frame (Y) Joins the detonating line
Remove 0DE5819 Hose As (1). Discard 0DE5819 Hose As (1) .
Remove 0DE4949 Hose As (2). Discard 0DE4949 Hose As (2) .
Illustration 5 g01060519
Underside view of the hood assembly (3) 0DE5128 Hose As (4) 0DE5831 Hose As (X) Joins 1DE3664 Union (Y) Joins 1DE2528 Union
Connect new 0DE5128 Hose As (3) to the elbow.
Connect new 0DE5831 Hose As (4) to the tee.
Illustration 6 g01060520
View of the new hose assembly connections (3) 0DE5128 Hose As (4) 0DE5831 Hose As (5) 9EQ4838 Firewall (6) 1DE3664 Union (7) 0DE5830 Hose As (8) 1DE2528 Union (9) 0DE5240 Hose As
Install 1DE3664 Union (6) to 9EQ4838 Firewall (5) .
Install 1DE2528 Union (8) to 9EQ4838 Firewall (5) .
Connect 0DE5831 Hose As (4) to 1DE2528 Union (8) .
Connect 0DE5128 Hose As (3) to 1DE3664 Union (6) .
Install new 0DE5830 Hose As (7) .
Install new 0DE5240 Hose As (9) .Installation of the Firewall
Illustration 7 g01061261
View of the firewall installation (C) Location of the fuel inlet at the rear of the engine (1) 5N-3175 Plug (2) 9X-2223 Button Plug (not used with a fire suppression system) (3) 5S-7379 Bolt (4) 8T-4896 Hard Washer (5) 7X-1442 Button Plug (6) 9EQ4838 Cover-Upper (7) 9EQ5461 Shroud (8) 5K-3546 Button Plug (not used with a fire suppression system) (9) 9EQ5474 Firewall (10) 8X-5156 Handhold (11) 9EQ5471 Lid (12) 9EQ5464 Firewall (13) 9EQ5466 Firewall (14) 9EQ5465 Firewall (15) 9EQ5470 Firewall (16) 9R-8537 Latch Socket (17) 4M-5281 Bolt (18) 8T-4205 Hard Washer (19) 6V-8185 Nut (20) 9EQ5135 Bracket (21) 8C-4427 Latch Plunger (22) 6V-7646 Hard Washer (23) 3E-9865 Locknut (24) 4M-5282 Bolt
Install the firewall. Refer to Illustration 7Modifications to the Fuel Lines
Illustration 8 g01062026
Left side view of the engine (1) 0DE5289 Hose As (2) 8M-0506 Connector
Remove 0DE5289 Hose As (1). Discard 0DE5289 Hose As (1) .
Remove 8M-0506 Connector (2). Discard 8M-0506 Connector (2) .
Illustration 9 g01062029
Location of the 0DE5833 Hose As (3) 4K-6297 Flared Elbow (4) 6V-5049 O-Ring Seal (5) 0DE5833 Hose As (6) 6D-4246 Clip (7) 9EL6383 Bracket (8) 8T-4122 Hard Washer (9) 5C-6266 Bolt (10) 8T-4896 Hard Washer (11) 4L-6454 Bolt
Install new 0DE5833 Hose As (5). Refer to Illustration 9.
Arm the fire suppression system (if equipped). Refer to the manufacturer's service information.