AVSPARE.COM
parts catalog

CYLINDER AS 1948229 - Caterpillar


1948229 CYLINDER AS Caterpillar parts 314C
Rating:
19
Alternative (cross code) number:
CA1948229
194-8229
1948229
Caterpillar 1948229 CYLINDER AS
Weight: 118 pounds 53 kg.

Buy CYLINDER AS 1948229 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 1948229:

EXCAVATOR  314C   Caterpillar
Number on catalog scheme: 1
  For full view, you need register

Information:


Illustration 1 g01330676
(1) Swing motor
(2) Left travel motor
(3) Right travel motor
(4) Bucket cylinder
(5) Stick cylinder
(6) Travel brake valve (left)
(7) Travel brake valve (right)
(8) Boom cylinder
(9) Swivel
(10) Pilot control valve (travel)
(11) Pressure switch
(12) Pressure switch
(13) Stick drift reduction valve
(14) Main control valve
(15) Boom drift reduction valve
(16) Pilot control valve (stick and swing)
(17) Pilot control valve (bucket and boom)
(18) Main relief valve
(19) Pressure switch
(20) Slow return check valve
(21) Bypass check valve
(22) Oil cooler
(23) Reducing valve (boom priority mode)
(24) Pilot oil manifold
(25) Travel speed solenoid valve
(26) Swing brake solenoid valve
(27) Valve
(28) Solenoid valve (hydraulic lockout)
(29) Accumulator
(30) Reducing valve (boom priority mode or swing priority mode)
(31) Gear pump (fan motor)
(32) Relief valve (fan pump)
(33) Pilot pump
(34) Drive pump
(35) Idler pump
(36) Pressure sensor (drive pump)
(37) Proportional reducing valve (power shift pressure)
(38) Pressure sensor (idler pump)
(39) Fan motor (hydraulic oil cooler)
(40) Return filter
(41) Hydraulic tank
(42) Drain filter
(43) Pilot relief valve
(44) Pilot filter
(45) Heavy lift solenoid valve Swing Motor without Fine Swing
Illustration 2 g01659675
(1) Swing motor
(14) Main control valve
(31) Gear pump (fan motor)
(33) Pilot pump
(34) Drive pump
(35) Idler pump
(41) Hydraulic tank Hydraulic Pump Flow and Pressure Control System
Illustration 3 g01330660
Pump compartment
(34) Drive pump
(35) Idler pump
(37) Proportional reducing valve (power shift pressure)
(46) Delivery line (drive pump)
(47) Delivery line (idler pump) This machine is driven and controlled by the following systems.
The main hydraulic system controls the cylinders, the travel motors and the swing motor.
The pilot hydraulic system supplies oil to the main pumps, the main control valve, the swing brake and the travel motors.
The electronic control system controls the outputs of the engine and pump.
The hydraulic oil cooling system provides oil to the fan motor in order to cool the hydraulic oil.The main hydraulic system delivers oil flow from idler pump (35) and drive pump (34) in order to control the following components: bucket cylinder (4), stick cylinder (5), boom cylinders (8), right travel motor (3), left travel motor (2) and swing motor (1).
Illustration 4 g01331528
Main control valve
(18) Main relief valve
(48) Right control valve body
(49) Left control valve body Idler pump (35) and drive pump (34) are variable displacement piston pumps. The performance of both pumps is equal.Drive pump (34) is directly connected to the engine by a flexible coupling. The drive pump delivers oil to the right control valve body (48) of the main control valve. Idler pump (35) is mechanically connected to the drive pump through gears. The idler pump delivers oil to the left control valve body (49) of the main control valve. Pilot pump (33) is a gear pump that supplies oil to the pilot hydraulic system. Pilot pump (33) is mechanically connected to idler pump (35) through gears. Gear pump (31) supplies oil to the oil cooling system. Gear pump (31) is mechanically connected to the engine through gears. All engine output is used to drive these four pumps.As the load pressure increases during working conditions, the main pumps increase the delivery pressure and the pumps decrease the flow rate. The hydraulic horsepower remains constant even though the delivery pressure and the flow rates change. The

Caterpillar parts catalog:

Caterpillar parts catalog
314C CR & 314C LCR Excavators KJA00001-UP (MACHINE) POWERED BY 3064 Engine
314C CR Excavator SNY00001-UP (MACHINE) POWERED BY 3064 Engine


Parts cylinder Caterpillar catalog:

2487854 CYLINDER & SEAL GP-BUCKET
311C, 312C L, 314C, 320C, 320D, 322C, 324D, 324D L, 325C L, 325D L, 329D L, 330C L
1709803 CYLINDER & SEAL GP-BUCKET
311C, 312C, 312C L, 314C, 320C, 322C, 323D L, 325C, 325D, 330C, 330C L
1709800 CYLINDER & LINES GP-BLADE
311C, 312C, 312C L, 314C, 315C
1709804 CYLINDER & SEAL GP-BLADE
311C, 312C, 312C L, 314C, 315C
2734147 CYLINDER GP-COUPLER
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 314C, 314D CR, 314D LCR, PIN GRAB
1709809 CYLINDER GP-BLADE
311C, 312C, 312C L, 314C, 315C
1709810 CYLINDER GP-BLADE
311C, 312C, 312C L, 314C, 315C
1850594 CYLINDER AS
318C, 319C, 320B, 320C, 325B L, 325C, 330B L, 330C, 345B L
2043693 CYLINDER AS
318C, 320C, 320C FM, 320C L, 321B, 321C, 322C, 325C L, 330D L
1453030 CYLINDER
315C, 318C, 319C, 320C, 320C L, 321C
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.