CYLINDER GP-BUCKET 1948279 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     195-4609     Seal Pick     1    
B     -     Isopropyl Alcohol     -    
Open the right side engine door.
Illustration 1 g02174474
Cut cable straps (2) and disconnect harness assembly (1) .
Illustration 2 g02174473
Cut cable straps (4) and remove the harness assembly for heated nozzle (3) .
Illustration 3 g02480016
Use Tooling (A) in order to remove O-ring seals (5) and (6) from harness assembly (3) . Discard the O-ring seals.Installation Procedure
Install heated nozzle (3) in the reverse order of removal.
Use caution when you are using isopropyl alcohol. Avoid prolonged skin contact with isopropyl alcohol.Vapors may be harmful if inhaled. Use only in a well ventilated area. Do not smoke while using isopropyl alcohol.Isopropyl alcohol is flammable. Do not use near an open flame or near welding operations. Keep isopropyl alcohol away from heated surfaces exceeding 482°C (900°F).
Note: This connection is an electrical connection and cannot be lubricated with a petroleum-based lubricant. Isopropyl alcohol is the only approved lubrication for this connection.
Lubricate new O-ring seals (5) and (6) with Tooling (B) prior to installation.