CYLINDER GP-HYDRAULIC 1979766 - Caterpillar

Attach bracket (20) to the 379-9012 Support As with the original hardware.
Install grommet (17) around tube assembly (14).
Install one clip (18) and one clip (19) around grommet (17).
Attach clips (18) and (19) to bracket (20) with one bolt (15), one washer (10), one washer (16), and one nut (11).
Illustration 8 g06087466
(7) 6K-4934 Clip
(8) 6K-4935 Clip
(10) 9X-6458 Hard Washer
(11) 9S-8752 Full Nut
(13) 477-6035 Tube As
(14) 482-8362 Tube As
(17) 452-5859 Grommet
(18) 5P-7464 Clip
(19) 5P-7465 Clip
(21) 0S-1591 Bolt
(22) 486-6748 Plate
(23) 165-3931 Bolt
(24) 6P-9592 Spacer
Install grommet (17) around tube assembly (14).
Install one clip (18) and one clip (19) around grommet (17).
Attach clips (18) and (19) loosely to plate (22) with one bolt (21), two washers (10), and one nut (11).
Install one clip (7) and one clip (8) around tube assembly (13).
Attach clips (7) and (8) to plate (22) with one bolt (23), one washer (10), and one spacer (24).
Tighten the previous hardware that was left loose.
Illustration 9 g06087533
(1) 6V-9847 Swivel Tee
(2) 5K-9090 O-Ring Seal
(10) 9X-6458 Hard Washer
(11) 9S-8752 Full Nut
(15) 0S-1588 Bolt
(23) 165-3931 Bolt
(25) 482-8364 Tube As
(26) 482-8365 Hose As
(27) 482-8366 Bracket
(28) 091-0081 Spacer
(29) 381-9503 Spacer
(30) 8T-1889 Clip
(31) 8T-1890 Clip
Install two O-rings (2) into swivel tee (1).
Attach swivel tee (1) and one O-ring (2) to the turbocharger connector.
Attach tube assembly (25) to swivel tee (1).Note: Make sure that the O-ring is in the swivel tee.
Attach the 90 degree end of hose assembly (26) to swivel tee (1).Note: Make sure that the O-ring is in the swivel tee.
Attach the straight end of hose assembly (26) and one O-ring (2) to tube assembly (25).
Attach bracket (27) to the turbocharger mount with one bolt (15), one washer (10), and one spacer (28).
Install one clip (30) and one clip (31) around tube assembly (25).
Attach clips (30) and (31) to bracket (27) with one bolt