CYLINDER BLOCK GP 1W5082 - Caterpillar

Open door (1). Disconnect harness assembly (3). Remove struts (2). Note: Support door (1) before removing struts (2).
Illustration 2 g01253898
Close door (2). Remove bolts (4) and door (1). Use two people to remove door (1). The weight of door (1) is approximately 23 kg (50 lb).
Illustration 3 g01253905
Loosen clamp (6). Disconnect pipe (5).
Illustration 4 g01253906
Remove pin (9). Remove the washer and nut (8). Remove nut (7). Remove lifting eye (10).
Illustration 5 g01253909
Illustration 6 g01253911
Attach Tooling (A) and a suitable lifting device to engine enclosure (11), as shown. The weight of engine enclosure (11) is approximately 147 kg (325 lb). Remove bolts (12) and engine enclosure (11). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 4
Illustration 7 g01253909
Illustration 8 g01253911
Attach Tooling (A) and a suitable lifting device to engine enclosure (11), as shown. The weight of engine enclosure (11) is approximately 147 kg (325 lb). Position engine enclosure (11) and install bolts (12).
Illustration 9 g01253906
Install lifting eye (10). Install nut (7). Install the washer and nut (8). Install pin (9).
Illustration 10 g01253905
Connect pipe (5). Tighten clamp (6).
Illustration 11 g01253898
Use two people to position door (1). The weight of door (1) is approximately 23 kg (50 lb). Install bolts (4).
Illustration 12 g01253890
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Support door (1). Install struts (2). Connect harness assembly (3). End By:
Install the generator enclosure group. Refer to Disassembly and Assembly, "Generator Enclosure Group - Remove and Install".