2000916 CYLINDER AS Caterpillar parts
M316C, M316D, M318C, M318D, M318D MH
Rating:
Alternative (cross code) number:
CA2000916
200-0916
2000916
CA2000916
200-0916
2000916
Weight: 105 pounds 47 kg.
WHEELED EXCAVATOR,
Compatible equipment models: 2000916:
Information:
Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     6V-4186     Fuel Pump Timing Pin     1    
B     0L-2070     Bolt     1    
C     5P-7307     Engine Turning Tool     1    
D     4C-9874     Spanner Wrench     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00476281
Install washer (1) and bolt (2). Ensure that the cover of the fuel pump housing is removed. Turn the fuel pump camshaft in the direction of the engine rotation until Tool (A) can be installed in the notch of the camshaft.
Install Tool (A) and (B) into position. Install the weight assembly for the timing advance on the fuel injection pump camshaft.
Illustration 2 g00476286
Use Tool (D) on the automatic timing advance and maintain a constant torque of 68 N m (50 lb ft). Tighten the bolt that fastens the automatic timing advance to the fuel pump camshaft to a torque of 270 25 N m (200 18 lb ft).
Remove Tools (A), (B), (C) and (D). Install the starting motor.End By: Install the front housing. Refer to Disassembly and Assembly, "Front Housing - Install".
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     6V-4186     Fuel Pump Timing Pin     1    
B     0L-2070     Bolt     1    
C     5P-7307     Engine Turning Tool     1    
D     4C-9874     Spanner Wrench     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00476281
Install washer (1) and bolt (2). Ensure that the cover of the fuel pump housing is removed. Turn the fuel pump camshaft in the direction of the engine rotation until Tool (A) can be installed in the notch of the camshaft.
Install Tool (A) and (B) into position. Install the weight assembly for the timing advance on the fuel injection pump camshaft.
Illustration 2 g00476286
Use Tool (D) on the automatic timing advance and maintain a constant torque of 68 N m (50 lb ft). Tighten the bolt that fastens the automatic timing advance to the fuel pump camshaft to a torque of 270 25 N m (200 18 lb ft).
Remove Tools (A), (B), (C) and (D). Install the starting motor.End By: Install the front housing. Refer to Disassembly and Assembly, "Front Housing - Install".
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
3676477
CYLINDER GP-HYDRAULIC
M318D, M318D MH
M318D, M318D MH
2768115
CYLINDER HEAD AS
120M, 12M, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, C6.6, CP-56, CP-64, CS-56B, CS-64, CS-74, CS-74B, D6K LGP, D6N, M316D, M318D, M318D MH, M322D, M322D MH
120M, 12M, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, C6.6, CP-56, CP-64, CS-56B, CS-64, CS-74, CS-74B, D6K LGP, D6N, M316D, M318D, M318D MH, M322D, M322D MH
2963235
CYLINDER GP-HYDRAULIC
M318C, M318C MH, M318D, M318D MH
M318C, M318C MH, M318D, M318D MH
3683244
CYLINDER GP-HYDRAULIC
M318D, M318D MH
M318D, M318D MH
2963238
CYLINDER GP-HYDRAULIC
M318C, M318C MH
M318C, M318C MH
2963236
CYLINDER GP-HYDRAULIC
M318C, M318C MH, M318D, M318D MH
M318C, M318C MH, M318D, M318D MH
3676474
CYLINDER GP-HYDRAULIC
M318D, M318D MH
M318D, M318D MH
3683243
CYLINDER GP-HYDRAULIC
M318D, M318D MH
M318D, M318D MH
3676475
CYLINDER GP-HYDRAULIC
M318D, M318D MH
M318D, M318D MH
3683246
CYLINDER GP-STICK
M318D, M318D MH
M318D, M318D MH
1367703
CYLINDER AS
M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
3721465
CYLINDER AS
M318D MH, M322D, M322D MH
M318D MH, M322D, M322D MH
1838857
CYLINDER AS
M318C, M318C MH, M318D, M318D MH
M318C, M318C MH, M318D, M318D MH
1838858
CYLINDER AS
M318C, M318C MH, M318D, M318D MH
M318C, M318C MH, M318D, M318D MH
1838856
CYLINDER AS
M318C, M318C MH, M318D, M318D MH
M318C, M318C MH, M318D, M318D MH
1838855
CYLINDER AS
M318C, M318C MH, M318D, M318D MH
M318C, M318C MH, M318D, M318D MH
1992439
CYLINDER AS
795F AC, 795F XQ, M315C, M316C, M318C, M318C MH
795F AC, 795F XQ, M315C, M316C, M318C, M318C MH
2376331
CYLINDER AS-HYDRAULIC
315C, 320C
315C, 320C
2263298
CYLINDER AS
M313C, M313D, M315C, M315D, M315D 2, M317D 2
M313C, M313D, M315C, M315D, M315D 2, M317D 2
1838976
CYLINDER AS
M315C, M315D
M315C, M315D
1838918
CYLINDER AS
M315C, M315D, M316C, M316D
M315C, M315D, M316C, M316D
1838917
CYLINDER AS
M315C, M315D, M316C, M316D
M315C, M315D, M316C, M316D
1838916
CYLINDER AS
M315C, M315D, M316C, M316D
M315C, M315D, M316C, M316D
1838915
CYLINDER AS
M316C, M316D
M316C, M316D