CYLINDER & VALVE GP-LIFT 2013215 - Caterpillar

Bucket Positioner - Tilt Adjustment
Use caution to avoid possible personal injury when adjusting the bucket positioner.Stop the engine and lower all equipment to relieve the hydraulic pressure.Engage the parking brake and block the tires to prevent sudden movement of the machine.Keep unauthorized personnel off the machine.
1. Start the engine. Lower the bucket to the ground. 2. Position the bucket at the desired angle to the ground. Stop the engine and turn the start key switch to ON. Move the tilt control to TILT BACK detent. 3. Loosen clamp, which secures the square tube to the tilt cylinder. To increase digging angle, move switch away from magnet. To decrease digging angle, move switch toward magnet. Tighten the clamp. 4. To test the adjustment, start the engine. Raise the bucket. Move the tilt control lever to TILT BACK detent.5. When the pre-set angle is reached, the tilt control lever should return to HOLD.Bucket Lift Kickout
Use caution to avoid possible personal injury when adjusting the implement lift kickout.Keep personnel off the machine. Clear the area when working under or around the implement linkage.With the implement raised, proper support must be provided for the implement and/or the linkage.
1. Start the engine. Raise the implement to the desired height and stop the engine.2. Block the bucket and the linkage. 3. Loosen the magnet clamp. Align the magnet with the switch assembly. 4. Move the magnet counterclockwise to increase, or clockwise to decrease the bucket lift kickout height.5. Tighten the clamp. 6. To check the adjustment, start the engine and move the bucket lift control to the RAISE detent.7. At the pre-set lift height, the control lever should return to HOLD.