CYLINDER AR-DUAL TILT 2045699 - Caterpillar

Illustration 2 g03857953
(7) 486-9177 Bracket As. (8) 486-2249 Bracket As. (9) 344-5674 Nut (10) 5P-4116 Hard Washer (11) 8T-7547 Bolt (12) 329-3356 Nut (13) 5P-1076 Hard Washer (14) 8T-4176 Bolt (15) 274-6580 Spacer (16) 337-0184 Cable As
Locate and install the two 274-6580 Spacers (15) into 337-0184 Cable As (16) .
Install both 486-9177 Bracket As (7) using two 8T-4176 Bolts (14), four 5P-1076 Hard Washers (13) and two 329-3356 Nuts (12) .
Attach both 486-2249 Bracket As (8) to brackets (7) using four 8T-7547 Bolts (11), eight 5P-4116 Hard Washers (10) and four 344-5674 Nuts (9) .Installation
Illustration 3 g03857873
Illustration 4 g03857874
Heavy-duty steps will be installed at locations (A), (B) and (C) .Use a suitable lifting device to hold parts in position during installation.
Illustration 5 g03857887
Enhanced view of operator station steps at location (A) . (17) 8T-7547 Bolt (18) 5P-4116 Hard Washer Attach one 483-4840 Step Gp to the operator station ladder location (A). Use four 8T-7547 Bolts (17) and four 5P-4116 Hard Washers (18).
Illustration 6 g03857888
Enhanced view of operator station steps at location (C) . (17) 8T-7547 Bolt (18) 5P-4116 Hard Washer Attach one 483-4840 Step Gp to the operator station ladder location (C). Use four 8T-7547 Bolts (17) and four 5P-4116 Hard Washers (18).
Illustration 7 g03857919
Enhanced view of rear platform step at location (B) .Attach one 484-1264 Step Gp to the left rear machine platform location (B). Use four 8T-4196 Bolts (20) and four 8t-4121 Hard Washers (19).