2053538 CYLINDER GP-STICK Caterpillar parts
304.5
Rating:
Alternative (cross code) number:
CA2053538
205-3538
2053538
CA2053538
205-3538
2053538
Weight: 93 pounds 42 kg.
MINI HYD EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
VVMUEWUIF Rear Sway Bar End Left Right Pair Set of 2 for Nissan for Altima 2.5L/3.5L 2013-2018 for Maxima 3.5L 2016-2018 205-3538
VVMUEWUIF Fitment:for Nissan,for Altima 2.5 L/3.5 L 2013-2018,for Maxima 3.5 L 2016-2018 || Item Offered:(1) Rear Passenger Side Sway Bar Linkage || Part Number:3719455189 || Kit Includes:(1) Rear Driver Side Sway Bar Linkage(1) Rear Passenger Side Sway Bar Linkage || Quantity:2 Piece || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent Performance
VVMUEWUIF Fitment:for Nissan,for Altima 2.5 L/3.5 L 2013-2018,for Maxima 3.5 L 2016-2018 || Item Offered:(1) Rear Passenger Side Sway Bar Linkage || Part Number:3719455189 || Kit Includes:(1) Rear Driver Side Sway Bar Linkage(1) Rear Passenger Side Sway Bar Linkage || Quantity:2 Piece || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent Performance
eMfurniture Rear Sway Bar End Left Right Pair Set of 2 for Nissan for Altima 2.5L/3.5L 2013-2018 for Maxima 3.5L 2016-2018 205-3538
eMfurniture Fitment:for Nissan,for Altima 2.5 L/3.5 L 2013-2018,for Maxima 3.5 L 2016-2018 || Item Offered:(1) Rear Passenger Side Sway Bar Linkage || Part Number:3719455189 || Kit Includes:(1) Rear Driver Side Sway Bar Linkage(1) Rear Passenger Side Sway Bar Linkage || Quantity:2 Piece || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent Performance
eMfurniture Fitment:for Nissan,for Altima 2.5 L/3.5 L 2013-2018,for Maxima 3.5 L 2016-2018 || Item Offered:(1) Rear Passenger Side Sway Bar Linkage || Part Number:3719455189 || Kit Includes:(1) Rear Driver Side Sway Bar Linkage(1) Rear Passenger Side Sway Bar Linkage || Quantity:2 Piece || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent Performance
SHZG Rear Sway Bar End Left Right Pair Set of 2 for Nissan for Altima 2.5L/3.5L 2013-2018 for Maxima 3.5L 2016-2018 205-3538
SHZG Fitment:for Nissan,for Altima 2.5 L/3.5 L 2013-2018,for Maxima 3.5 L 2016-2018 || Item Offered:(1) Rear Passenger Side Sway Bar Linkage || Part Number:3719455189 || Kit Includes:(1) Rear Driver Side Sway Bar Linkage(1) Rear Passenger Side Sway Bar Linkage || Quantity:2 Piece || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent Performance
SHZG Fitment:for Nissan,for Altima 2.5 L/3.5 L 2013-2018,for Maxima 3.5 L 2016-2018 || Item Offered:(1) Rear Passenger Side Sway Bar Linkage || Part Number:3719455189 || Kit Includes:(1) Rear Driver Side Sway Bar Linkage(1) Rear Passenger Side Sway Bar Linkage || Quantity:2 Piece || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent Performance
For full view, you need register
Compatible equipment models: 2053538:
Information:
Removal Procedure
Start By:
Remove the bracket for the Electronic Control Module. Refer to Disassembly and Assembly, "ECM Mounting Bracket - Remove and Install".
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorised personnel that have the correct training.Before begining ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 1 g01336192
Typical example
If the engine has a left hand side oil filter, remove the oil filter base. Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install".
Make temporary identification marks on plastic tube assemblies (2) in order to show the correct position of the tube assemblies.
Remove plastic tube assemblies (2). Plug all plastic tube assemblies with new plugs. Cap all open ports with new caps.
Follow Steps 5.a through 5.d in order to disconnect the engine wiring harness (3).
Disconnect engine wiring harness (3) from position sensor (1) for the fuel injection pump.
Disconnect engine wiring harness (3) from the solenoid for the fuel injection pump.
Disconnect engine wiring harness (3) from oil pressure sensor (8).
Cut the cable straps that secure engine wiring harness (3) to the assembly of oil cooler (4). Position the harness away from the assembly of the oil cooler.
Remove tube assembly (6) for the fuel return from the cylinder head and from transfer pump (5). Plug the tube assembly with new plugs. Cap all open ports with new caps.
Illustration 2 g01336193
Typical example
If necessary, loosen bolts (7). Remove bolts (7) and remove brackets for the tube assemblies. Remove the assembly of oil cooler (4) from the cylinder block. Note: The bolts are different lengths. Note the position of the different bolts. Note the location and the orientation of the brackets for the tube assemblies.
Remove joint (8). Refer to Illustration 3. Disassembly Procedure (Engine Oil Cooler with a High Mounted Filter Base)
Illustration 3 g01336224
Remove nuts (12) from the assembly of oil cooler (6).
Remove cooler matrix (9) from housing (11).
Remove joints (10).
Start By:
Remove the bracket for the Electronic Control Module. Refer to Disassembly and Assembly, "ECM Mounting Bracket - Remove and Install".
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorised personnel that have the correct training.Before begining ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 1 g01336192
Typical example
If the engine has a left hand side oil filter, remove the oil filter base. Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install".
Make temporary identification marks on plastic tube assemblies (2) in order to show the correct position of the tube assemblies.
Remove plastic tube assemblies (2). Plug all plastic tube assemblies with new plugs. Cap all open ports with new caps.
Follow Steps 5.a through 5.d in order to disconnect the engine wiring harness (3).
Disconnect engine wiring harness (3) from position sensor (1) for the fuel injection pump.
Disconnect engine wiring harness (3) from the solenoid for the fuel injection pump.
Disconnect engine wiring harness (3) from oil pressure sensor (8).
Cut the cable straps that secure engine wiring harness (3) to the assembly of oil cooler (4). Position the harness away from the assembly of the oil cooler.
Remove tube assembly (6) for the fuel return from the cylinder head and from transfer pump (5). Plug the tube assembly with new plugs. Cap all open ports with new caps.
Illustration 2 g01336193
Typical example
If necessary, loosen bolts (7). Remove bolts (7) and remove brackets for the tube assemblies. Remove the assembly of oil cooler (4) from the cylinder block. Note: The bolts are different lengths. Note the position of the different bolts. Note the location and the orientation of the brackets for the tube assemblies.
Remove joint (8). Refer to Illustration 3. Disassembly Procedure (Engine Oil Cooler with a High Mounted Filter Base)
Illustration 3 g01336224
Remove nuts (12) from the assembly of oil cooler (6).
Remove cooler matrix (9) from housing (11).
Remove joints (10).
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
1859232
CYLINDER GP-IDLER
303, 303.5, 304.5, 305, 305.5, 306
303, 303.5, 304.5, 305, 305.5, 306
1859233
CYLINDER GP-IDLER
303, 303.5, 304.5, 305, 305.5, 306
303, 303.5, 304.5, 305, 305.5, 306
3024, 304.5, 902
2177395
CYLINDER BLOCK GP
216, 216B, 232B, 242B, 3024, 3024C, 304.5, C2.2, CB-334E
216, 216B, 232B, 242B, 3024, 3024C, 304.5, C2.2, CB-334E
1540881
CYLINDER HEAD GP
3024, 304.5, 902
3024, 304.5, 902
1831337
CYLINDER BLOCK GP
3024, 304.5
3024, 304.5
2020522
CYLINDER BLOCK GP-SHORT
3024, 304.5, 902
3024, 304.5, 902
1859230
CYLINDER
303, 303.5, 304.5, 305, 305.5, 306
303, 303.5, 304.5, 305, 305.5, 306
2053539
CYLINDER GP-BOOM
304.5
304.5
2053535
CYLINDER GP-BOOM
303.5
303.5
2839115
CYLINDER AS
304, 304C CR, 305, 305.5D, 305C CR, 305D CR
304, 304C CR, 305, 305.5D, 305C CR, 305D CR
1500474
CYLINDER
303
303