CYLINDER PACK AS 20R0930 - Caterpillar

Location of parts.Adaptable To: The new lever assemblies, with the other parts shown in the chart, are adaptable to all D3 Tractors and 931 Loaders. INSTALLATION: Install the 5G1233 and 5G1234 Lever Assemblies and the 5G1232 Block Assembly in the 5G1231 Lever Assembly. The clearance at (A) must not be more than .031" (0.8 mm). When the clearance at (A) is correct, connect the lever (B) to the 5G1231 Lever Assembly.
Make an adjustment to the rod (C) so it will be 11.66" (296 mm) long from the center of one anchor bolt to the center of the other anchor bolt. Connect rod (C) to the 5G1234 Lever Assembly. Adjust rod (D) so the 5G1234 and 5G1233 Lever Assemblies are in alignment with each other. Connect rod (D) to the anchor bolts. The transmission control linkage will move freely when the rods (C and D) are correctly adjusted.