CYLINDER GP-STICK 2107082 - Caterpillar

Disassembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00748551
Remove two bolts that hold flange (3) to inner housing (1). Remove O-ring seal (2) .
Remove two bolts that hold flange (7) to air intake housing (4). Remove O-ring seal (6) .
Remove two bolts (5) from air intake housing (4) .
Illustration 2 g00748579
Remove sixteen bolts (10) that fasten inner housing (1) to air intake housing (4). Remove the bolts in a sequence that starts at each end of the housing. Then, work toward the center of the housing.
Separate inner housing (1) and air intake housing (4). Slide air intake housing (4) away from line (9) for the sea water outlet. Remove the air intake housing.
Carefully remove aftercooler (8) from inner housing (1) .