CYLINDER AS. 2126712 - Caterpillar

Illustration 7 g01481297
Remove Tooling (B) . Install covers (31) . Install tube assembly (30) .
Illustration 8 g01409650
Install block (28) . Connect tube assembly (27) . Connect hose assembly (29) .
Illustration 9 g01409655
Remove Tooling (A) .
Illustration 10 g01409648
Install harness assembly (25) . Install clips (24) .
Illustration 11 g01409620
Connect hose assemblies (22) . Connect hose assembly (21) . Connect harness assembly (18) . Install clips (19) and (23) . Connect bracket (20) .
Illustration 12 g01409618
Position bracket (16) . Install bolts (17) .
Illustration 13 g01411031
Connect bracket (14) . Connect hose assembly (15) .
Illustration 14 g01411028
Connect bracket (13) .
Illustration 15 g01411027
Connect harness assemblies (12) . Connect hose assemblies (11) .
Illustration 16 g01411025
Connect hose assemblies (10) .
Illustration 17 g01409677
Connect hose assemblies (9) .
Illustration 18 g01409674
Connect hose assemblies (8) .
Illustration 19 g01406667
Illustration 20 g01406665
Install bolts (4) . Install screen assembly (7) . Attach a suitable lifting device to screen assembly (7) . The weight of screen assembly (7) is approximately 50 kg (110 lb). Connect hose assembly (5) . Install clip (6) .
Illustration 21 g01406663
Install clip (2) . Connect hose assemblies (1) .
Fill the transmission oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Transmission Oil - Change".
Fill the hydraulic oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Oil (Implement)- Change".End By:
Install the front section of the auxiliary drive shaft. Refer to Disassembly and Assembly , "Drive Shaft (Auxiluary) - Install".
Connect the rod end of the steering cylinder. Refer to Disassembly and Assembly , "Steering Cylinder - Remove".
Remove chocks from all of the wheels. Refer to Disassembly and Assembly , "Wheel Chock (Front and Rear) - Remove and Install".