CYLINDER BLOCK GP-SHORT 2154181 - Caterpillar

2154181 CYLINDER BLOCK GP-SHORT Caterpillar parts 3056

Price: query

Rating:

Alternative (cross code) number:
CA2154181
215-4181
2154181

Caterpillar 2154181 CYLINDER BLOCK GP-SHORT

Buy CYLINDER BLOCK GP-SHORT 2154181 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE, INDUSTRIAL ENGINE,

Compatible equipment models: 2154181:

GEN SET ENGINE 3056

INDUSTRIAL ENGINE Caterpillar

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

3056 Industrial Engine 1ML00001-UP

211-6551: ENGINE AR-PRIMARY » SEBP20430029
211-6552: ENGINE AR-PRIMARY » SEBP20430030
211-6553: ENGINE AR-PRIMARY » SEBP20430031
211-6554: ENGINE AR-PRIMARY » SEBP20430032
211-6555: ENGINE AR-PRIMARY » SEBP20430033
214-0988: ENGINE AR-PRIMARY » SEBP20430039
216-4256: ENGINE AR-PRIMARY » SEBP20430043

3056 Generator Set Engine 7AK00001-UP

224-4257: ENGINE AR-PRIMARY » SEBP22160005

Information:

Remove cover (2) .
Illustration 3 g01033552
Disconnect hose assemblies (3) .
Illustration 4 g01033555
Remove knob (4). Remove locknut (5). Pull the cable through the floor of the cab.
Illustration 5 g01033561
Disconnect harness assembly (6) that is located on the right side of the cab.
Illustration 6 g01033563
Disconnect harness assembly (7) from the right side of the cab. Disconnect wires (8) .
Illustration 7 g01033569
Disconnect hose assemblies (9) at the quick disconnects.
Illustration 8 g01033571
Disconnect harness assemblies (11) and disconnect ground strap (10) from the left side of the cab.
Illustration 9 g01033576
Disconnect cable assemblies (12) from the left side of the cab.
Illustration 10 g01033580
Disconnect harness assemblies (13) from the left side of the cab.
Illustration 11 g01033593
Disconnect harness assemblies (14) .
Illustration 12 g01033597
Turn valves (17) into the OFF position. Remove clamp (15) (not shown). Disconnect hoses (16) .
Illustration 13 g01006514
Remove bolts (20) from cab (18). Position warning beacon (19) to one side.
Illustration 14 g01006515
Attach Tooling (A) and a suitable lifting device to the cab (18), as shown. The weight of the cab is approximately 1202 kg (2650 lb).
Illustration 15 g01006516
Remove cover (21) .
Illustration 16 g01006517
Remove bolt (22) .
Illustration 17 g01006518
Remove bolt (23) .
Repeat steps 15 through 17 for the opposite side of the cab. Remove the cab. The rear of the cab must be raised before the front of the cab is raised. The weight of the cab is approximately 1202 kg (2650 lb).