CYLINDER & MTG GP-LIFT ARM 2185799 - Caterpillar

exit Joystick Mode, so that the vessel can be controlled by the thruster control panels and the control heads, do one of the following:
With the joystick centered, press and release the Station Select button at a control head to transfer control and select it as the active station.Note: The levers at the target control head must be in the NEUTRAL position and the transmissions must also be in NEUTRAL.
Perform an Emergency Station Transfer (always enabled) to a control head by two consecutive presses of the Station Select button for that control head.Note: Emergency Station Transfers to a control head can always be performed regardless of joystick and lever position or the in-gear status of the transmissions.
Press and release the station select button for the active joystick. The joystick station LEDs turn off and the engine speed ramps down to the base idle speed. The joystick station is now de-selected and the system is in Leverhead Mode. No station is active once in Leverhead Mode.
If present, activate the optional lockout switch for the active station.Note: Certain fault conditions also cause the system to exit Joystick Mode. Refer to the Troubleshooting Guide for more information on these conditions.