CYLINDER GP-STEERING 2198837 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-0005 Spanner Wrench 1
B 1P-0074 Slide Hammer Puller 1
8B-7555 Adapter 1
1H-3109 Leg 1
8B-7559 Adapter 1 Start By:
Remove the brake accumulators. Refer to Disassembly and Assembly, "Brake Accumulator - Remove".
The accumulator is filled with dry nitrogen. Sudden release of nitrogen pressure can cause personal injury.To avoid personal injury, release the nitrogen pressure from the accumulator before disassembly.
Release the pressure from the accumulators.
Illustration 1 g00335957
Remove valve assembly (1) and the washer from brake accumulator (4).
Remove the bolt, nut (2) and the two washers from clamp assembly (3). Remove the clamp assembly from the brake accumulators.
Illustration 2 g00336019
Use Tooling (A) to remove head (5) from the brake accumulator.
Illustration 3 g00336020
Remove backup ring (6) and O-ring seal (7) from the head.
Illustration 4 g00336021
Use Tooling (B) to remove piston (8) from the brake accumulator. Remove wear ring (9) and seal assembly (10) from piston (8).