CYLINDER GP-HOIST 2249465 - Caterpillar

Illustration 1 g03019437
Table 1
Specification for 380-9601 Camshaft Gp
Item Qty Part Specification Description
1 16 5P-0076 Bolt Torque to 55 7 N m (41 5 lb ft).
2 2 128-5993 Thrust Washer Thickness is 8.40 0.05 mm (0.331 0.002 inch).
Width of the groove in the camshaft for thrust washer is 8.75 0.05 mm (0.344 0.002 inch).
Illustration 2 g03019438
Table 2
Item Qty Part Specification Description
A - - Diameter of bearing journal is 91.880 0.020 mm (3.6173 0.0008 inch).
B 1 4N-1650 Dowel Extension of dowel from the end of camshaft assembly is 22.0 0.5 mm (0.87 0.02 inch).
C 1 5B-5821 Dowel Extension of dowel from the end of camshaft assembly is 12.0 0.5 mm (0.47 0.02 inch).
Illustration 3 g03019436
Table 3
Item Qty Part Specification Description
- - - Use the following procedure in order to determine the actual camshaft lobe lift:
1. Measure camshaft lobe height (E).
2. Measure the base circle (F).
3. Subtract the base circle (F) from the camshaft lobe height (E). The difference is the actual camshaft lobe lift (D).
D - - Specified camshaft lobe lift for:
Inlet lobe is 12.7300 mm (0.50118 inch).
Exhaust lobe is 13.1000 mm (0.51575 inch).
Injector lobe is 13.8065 mm (0.54356 inch).