CYLINDER & SEAL GP-BUCKET 2254599 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00694258
Illustration 2 g01021739
Position control manifold (8) and connect hose assembly (7).
Install bolts (6) and new cable straps (5).
Illustration 3 g01383131
Connect hose assemblies (4). Connect harness assemblies (3).
Illustration 4 g01377908
Remove Tooling (A) and install the cap to the hydraulic tank.
Illustration 5 g01383107
Install cover (2).
Install high efficiency filters in place of the pilot filter, the case drain filter, and the return filter. Note: High efficiency filters should not be run for more than 250 hours before you change back to the standard filters.
Illustration 6 g01383106
Install cover (1).