CYLINDER GP-LIFT 2283509 - Caterpillar

Dumping state icon - This icon represents the dumping state of the truck.
Travel empty state icon - This icon represents the travel empty state of the truck.
Arriving empty state icon - This icon represents the arriving empty state of the truck.
Loading state icon - This icon represents the loading state of the truck.
Travel loaded state icon - This icon represents the travel loaded state of the truck.
Arriving loaded state icon - This icon represents the arriving loaded state of the truck. Note: The state icon window will be gray when the truck is on delay.Key Performance Indicator (KPI)
A KPI window displays key performance indicator information to the operator. The window displays a bar graph that indicates values. This information allows the truck operator to be aware of information on performance. KPI data can be displayed as percentages or values.
Illustration 4 g02154448
KPI window that displays team tons as valueThe three following types of KPI information may be displayed:
Loads
Tons
Team tonsA screen can be configured with a separate KPI window for each KPI type. This window will display "Truck Tons" or "Team Tons".As the mine office sends new KPI information, updated information is sent to Fleet onboard. The information is displayed on the monitor display group to the operator. The following parameters may be sent in the KPI message:
Target KPI value
Current KPI value
Percentage of target display or actual value display
KPI typeDipper
Illustration 5 g02154554
Dipper windowA dipper window provides a loader operator the amount of material to load into the next dipper to fill the truck to capacity. Also, a dipper window provides colors to assist in warning the operator that the truck is nearing capacity. This information is based on the payload information for the current truck. A dipper window can only be used with the VIMS.A dipper window is configured to provide a range of dipper values. The dipper values indicate to the operator that the load is one of the following indications:Load full - The load is almost full. The default color is red.Load warning - The load is nearing capacity. The default color is yellow.Load OK - The load is not near capacity. The default color is green.Truck Load History
A truck load history window displays, in a bar graph, the loads of previous trucks that were loaded by the loading operator. This format allows the loading operator to see individual performance in loading trucks to capacity. History can include information on previous trucks or the current truck only. This window is only available if the truck is equipped with VIMS.
Illustration 6 g02154608
Truck load history window (1) 100 percent capacity line (2) Underload capacity line (3) Current payload windowThe truck load history window is configured to display the percentage of the load capacity by color. The color of a bar is distinguished as one of the following capacity characteristics:Overload - With an overload value of 110 percent and red for the color, any truck load that is filled to 110 percent of the capacity for the truck will appear as a red bar.