CYLINDER & LINES GP-SHEAR 2405497 - Caterpillar

Two-Way Valve
WHENEVER A CHANGE IS MADE TO THE MACHINES CONTROL PATTERN ALSO EXCHANGE THE PATTERN CARD IN THE CAB TO MATCH THE NEW PATTERN. FOLLOW THE CORRECT PROCEDURE IN THE OPERATOR AND MAINTENANCE MANUAL.
Illustration 1 g02192098
The joystick control selector is located below the seat on the left-hand side. (A) LeverThe machine control pattern can easily be changed to the SAE system or to the standard backhoe loader hydraulic system (BHL) by changing the position of the two-way valve.
Illustration 2 g02192080
(1) Stick control valve (2) Stick cylinder (3) Boom cylinder (4) Boom control valve (5) Joystick control selector (6) Pilot control valve (boom and bucket) (7) Pilot control valve (stick and swing) (A) Standard position (SAE) (B) Alternate position (standard backhoe loader hydraulic system (BHL))
Illustration 3 g00842464
The patterns on the left side of Illustration 3 show the possible configurations for the left joystick. The patterns on the right side of the illustration show the possible configurations for the right joystick.
Stick Out (1) - Move the joystick to this position in order to move the stick outward.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Stick In (3) - Move the joystick to this position in order to move the stick inward.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left.
Boom Lower (5) - Move the joystick to this position in order to lower the boom.
Bucket Dump (6) - Move the joystick to this position in order to dump the bucket.
Boom Raise (7) - Move the joystick to this position in order to raise the boom.
Bucket Close (8) - Move the joystick to this position in order to close the bucket. HOLD (9) - When the joystick is released from any position, the joystick will return to the HOLD position. Movement of the upper structure will stop.Two functions may be performed at the same time by moving a joystick diagonally.