CYLINDER GP-BOOM 2426764 - Caterpillar

When opening or closing the windshields, be extra careful to prevent any personal injury. Also, the hydraulic activation control lever must be in the LOCKED position to prevent any possibility of sudden movement of machine due to inadvertent contact with the hydraulic control(s).
Do not change the position of the window until the following items have been done:
Park the machine on a level surface.
Lower equipment to the ground.
Move the hydraulic activation control lever to the LOCKED position.
Stop the engine.Perform step 1 through step 2 in order to open the upper window.
Illustration 1 g01245227
(1) Grip
(2) Latch
Hold both grips (1) and squeeze both latches (2) in order to unlatch the window.
Illustration 2 g00107355
Lift the window upward until the window is securely latched in the overhead position. Perform step 1 in order to close the upper window.
Hold both grips (1) and squeeze both latches (2) in order to unlatch the window. Lower the window until the latches (2) engage. Once the latches engage, the window is in the LOCKED position. Perform step 1 through step 5 in order to open the lower window and close the lower window.
Raise the upper window into the locked position.
Illustration 3 g01245266
(3) Latch
Squeeze both latches (3) in order to unlock the lower window.
Illustration 4 g00103837
Grasp the window and raise the lower window out of the window frame.
Illustration 5 g01245276
Store the lower window in the holder that is located in the rear of the right side cab frame. In order to store the lower window, locate one end of the lower window into brackets (4). Secure the opposite end of the lower window with catch (5).
In order to close the lower window, reverse the procedure that is used for opening the window.