CYLINDER HEAD ASSEMBLY 2572170 - Caterpillar

2572170 CYLINDER HEAD ASSEMBLY Caterpillar parts 966H, 972H

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2572170
257-2170
2572170

Caterpillar 2572170 CYLINDER HEAD ASSEMBLY

Weight: 315 pounds 143 kg.

Buy CYLINDER HEAD ASSEMBLY 2572170 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

You can buy:

Cylinder Head Assembly 257-2170 for Caterpillar CAT C11 C13 Engine 966H 972H 345C 345CL

US$3,575.00

29 May 2025

FridayParts

Cylinder Head Assembly 257-2170 for Caterpillar CAT C11 C13 Engine 966H 972H 345C 345CL

Compatible equipment models: 2572170:

WHEEL LOADER 966H 972H Caterpillar

Number on catalog scheme: 9

Caterpillar 2572170 Parts scheme CYLINDER HEAD ASSEMBLY

For full view, you need register

Information:

Position the machine on level ground and stop the engine.
Install 9U-7400 Multitach Tool Gp on the lower carriage in order to check the drive shaft speed.
Attach a reflective tape to the drive shaft.
Start the engine.
Lower the left console.
Illustration 1 g00294504
Lower the stabilizer, the blade tip, and/or the implement in order to raise the front axle and the rear axle. This will allow the wheels to turn freely. All tires must be off the ground.Note: The following steps are for maximum flow adjustment.
Place the machine in first gear and creeper speed. Place the engine speed dial in position 10.
Depress the travel pedal for FORWARD travel. Allow the machine to operate in forward travel for one minute in order to stabilize the drive shaft speed.
Table 2
Drive Shaft Speed in First Gear
Activated Creeper Speed (Forward and Reverse) (1)
267 10 rpm (2)
( 1 ) The specifications are for a machine with the wheels above the ground. Drive shaft speed will be 10 percent lower than the