CYLINDER BLOCK GP 2633774 - Caterpillar

Starter Motors
(1) Tighten the terminal nut to a torque of ... 27.0 to 33.8 N m (20 to 25 lb ft)Tighten the screws to a torque of ... 17.6 to 23.0 N m (13 to 17 lb ft)Clearance between the pinion and housing ... 8.3 to 9.9 mm (.33 to .39 in.)Prestolite Starter Motors
4N3181 24V (Prestolite Number MES6404K), 9G4338 24V (Prestolite Number MES6601K)
Rotation as seen from the drive end ... clockwiseMinimum (no load) speed (rpm) ... 6500Current consumption (draw) at 20V (no load) ... 77A(1) Torque for the housing bolts ... 11 N m (8 lb ft)(2) Torque for the terminal nuts ... 27.0 to 33.8 N m (20 to 25 lb ft)(3) Clearance between the pinion and housing ... 0.51 to 1.27 mm (.020 to .050 in.)Bosch Starter Motors
3T6305 24V (Bosch Number 0001-420003), 4N3181 24V
Rotation as seen from the drive end ... clockwiseMaximum (no load) speed (rpm) ... 5500Maximum current consumption (draw) (no load) ... 200A(1) Torque for the large terminal nuts ... 27 to 33 N m (20 to 24 lb ft) Torque for the small terminal nuts ... 4 to 5 N m (35 to 45 lb in)(2) Service limit of brushes ... 17.5 mm (.69 in.)(3) Service limit of commutater diameter ... 48 mm (1.9 in.)Pinion to ring gear clearance ... 1.5 to 5.5 mm (.06 to .22 in.)7T2267 12V (Bosch Number 0001-421006)
Rotation as seen from the drive end ... clockwiseMaximum (no load) speed (rpm) ... 5500Maximum current consumption (draw) (no load) ... 200A(1) Torque for the large terminal nuts ... 27 to 33 N m (20 to 24 lb ft) Torque for the small terminal nuts ... 4 to 5 N m (35 to 45 lb in)(2) Service limit of brushes ... 17.5 mm (.69 in.)(3) Service limit of commutater diameter ... 48 mm (1.9 in.)Pinion to ring gear clearance ... 1.5 to 5.5 mm (.06 to .22 in.)Nippondenso Starter Motors
8C5580 24V (Nippondenso Number 128000-4970)
Rotation as seen from the drive end ... clockwiseMinimum no load speed (rpm) ... 3500Maximum current consumption (draw) (no load) ... 90APull-in current at 12V ... 50AHold-in current at 12V ... 20A(1) Tighten the ground terminal nut to a torque of ... 31 4 N m (23 3 lb ft)(2) Tighten the battery terminal nut to a torque of ... 31 4 N m (23 3 lb ft)(3) Tighten the switch terminal screw to a torque of ... 2.3 0.25 N m (21 3 lb in)