CYLINDER AS 2667864 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     4C-4030     Thread Lock Compound     1    
Illustration 1 g00278604
Note: Before installation, apply Tooling (A) to bolts (10) .
Position plate (9) on the steering metering pump. Install bolts (10). The torque for bolts (10) is 55 10 N m (40 7 lb ft).
Illustration 2 g00278603
Illustration 3 g00984698
Install steering metering pump (8) .Note: The splines of the steering metering unit must align.
Illustration 4 g00278602
Install bolts (7) at the base of the steering column. The torque for bolts (7) is 28 7 N m (21 5 lb ft).
Illustration 5 g00278601
Put the insulation and rubber mat (6) on the cab floor.
Illustration 6 g00278600
Connect hose assemblies (5) .
Illustration 7 g00278599
Install brake control valve (4) and bolts (3) .
Illustration 8 g00278598
Install panel (2) and bolts (1) .
Fill the hydraulic tank with oil. Refer to Operation and Maintenance Manual for the correct procedure.End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".