2667978 CYLINDER & SEAL GP-BUCKET Caterpillar parts
320D, 320D LN, 320D LRR, 320D2 L, 323D L
Rating:
Alternative (cross code) number:
CA2667978
266-7978
2667978
CA2667978
266-7978
2667978
EXCAVATOR,
Number on catalog scheme:
For full view, you need register
Information:
Throttle Lock Engine Set Speed Increment
The "Throttle Lock Engine Set Speed Increment" controls the increase in engine speed when the PTO switch is briefly operated to ACCELERATE or DECELERATE. If this parameter is set to "0", the feature is turned off.
Table 8
Minimum Maximum Default
0 rpm 200 rpm 10 rpm Miscellaneous
Monitoring Mode Shutdowns
"Monitoring Mode Shutdowns" controls the shutdown feature that is associated with the engine monitoring feature. When this feature is enabled and an event code with a "-3" suffix is detected, the engine will be shut down.
Table 9
Value Default
Disabled
Enabled Disabled Monitoring Mode Derates
"Monitoring Mode Derates" controls the derate that is associated with the engine monitoring feature. When this feature is enabled and an event code with a "-2" is detected, the engine will be derated.
Table 10
Value Default
Disabled
Enabled Enabled Limp Home Desired Engine Speed
The "Limp Home Desired Engine Speed" is the maximum speed of the engine when the engine has been derated.
Table 11
Minimum Maximum Default
700 rpm 1800 rpm 1200 rpm J1939 Continuous Fault Handling
Remote Torque Speed Control Enable Status
The "Remote Torque Speed Control Enable Status" parameter determines the way that faults will be handled by the ECM when the "J1939 Torque Speed Control (TSC1)" message is used as a speed request input to the ECM. Programming the "Remote Torque Speed Control Enable Status" to "Enabled" will cause the ECM to display a fault code if a valid TSC1 message is not received by the engine ECM within 30 seconds of the engine starting. If the" Remote Torque Speed Control Enable Status" is programmed to "Disabled", the engine will display a 247-12 Data Link Malfunction immediately after a loss of a TSC1 message. Program "Remote Torque Speed Control Enable Status" to "Enabled" if the ECM will always be receiving a TSC1 message.
Table 12
Value Default
Disabled
Enabled Disabled Configurable Inputs
Coolant Level Sensor
A coolant level sensor is an optional switch input. Programming the "Coolant Level Sensor" parameter to "Enabled" notifies the ECM that a coolant level sensor input is present. If this parameter is programmed
The "Throttle Lock Engine Set Speed Increment" controls the increase in engine speed when the PTO switch is briefly operated to ACCELERATE or DECELERATE. If this parameter is set to "0", the feature is turned off.
Table 8
Minimum Maximum Default
0 rpm 200 rpm 10 rpm Miscellaneous
Monitoring Mode Shutdowns
"Monitoring Mode Shutdowns" controls the shutdown feature that is associated with the engine monitoring feature. When this feature is enabled and an event code with a "-3" suffix is detected, the engine will be shut down.
Table 9
Value Default
Disabled
Enabled Disabled Monitoring Mode Derates
"Monitoring Mode Derates" controls the derate that is associated with the engine monitoring feature. When this feature is enabled and an event code with a "-2" is detected, the engine will be derated.
Table 10
Value Default
Disabled
Enabled Enabled Limp Home Desired Engine Speed
The "Limp Home Desired Engine Speed" is the maximum speed of the engine when the engine has been derated.
Table 11
Minimum Maximum Default
700 rpm 1800 rpm 1200 rpm J1939 Continuous Fault Handling
Remote Torque Speed Control Enable Status
The "Remote Torque Speed Control Enable Status" parameter determines the way that faults will be handled by the ECM when the "J1939 Torque Speed Control (TSC1)" message is used as a speed request input to the ECM. Programming the "Remote Torque Speed Control Enable Status" to "Enabled" will cause the ECM to display a fault code if a valid TSC1 message is not received by the engine ECM within 30 seconds of the engine starting. If the" Remote Torque Speed Control Enable Status" is programmed to "Disabled", the engine will display a 247-12 Data Link Malfunction immediately after a loss of a TSC1 message. Program "Remote Torque Speed Control Enable Status" to "Enabled" if the ECM will always be receiving a TSC1 message.
Table 12
Value Default
Disabled
Enabled Disabled Configurable Inputs
Coolant Level Sensor
A coolant level sensor is an optional switch input. Programming the "Coolant Level Sensor" parameter to "Enabled" notifies the ECM that a coolant level sensor input is present. If this parameter is programmed
Caterpillar SIS machinery equipment:
Caterpillar SIS
320D RR & 320D LRR Excavators EBY00001-UP (MACHINE) POWERED BY 3066 Engine »
266-7978
CYLINDER & SEAL GP-BUCKET
320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 Engine »
266-7978
CYLINDER & SEAL GP-BUCKET
320D & 320D L Excavators FAL00001-UP (MACHINE) POWERED BY C6.4 Engine »
266-7978
CYLINDER & SEAL GP-BUCKET
320D LN Excavator WBN00001-UP (MACHINE) POWERED BY C6.4 Engine »
266-7978
CYLINDER & SEAL GP-BUCKET
323D L Excavator YSD00001-UP (MACHINE) POWERED BY C6.4 Engine »
266-7978
CYLINDER & SEAL GP-BUCKET
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D L, 320D LN, 320D LRR, 320D RR, 323D L, 323D LN, 324D, 324D L
320D, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C
320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D2 L, 323E L, 324D
320D, 320D FM, 320D FM RR, 320D L, 320D LRR, 320D RR, 323D L
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 ...
3600074
CYLINDER AS
320D, 320D L, 320D2, 320D2 L, 320E LN, 323D L, 323D2 L, 323E L, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329E LN
320D, 320D L, 320D2, 320D2 L, 320E LN, 323D L, 323D2 L, 323E L, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329E LN
3521101
CYLINDER AS-HYDRAULIC
320D, 320E, 320E RR
320D, 320E, 320E RR
3521098
CYLINDER AS-STICK
320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D2 L, 323E L
320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D2 L, 323E L
3521099
CYLINDER AS-STICK
320D, 320D L, 320D2, 320D2 L, 323D L, 323D2 L
320D, 320D L, 320D2, 320D2 L, 323D L, 323D2 L
2667976
CYLINDER & SEAL GP-STICK
320D, 320D L, 323D L
320D, 320D L, 323D L
2667975
CYLINDER & LINES GP-STICK
320D, 320D L, 323D L
320D, 320D L, 323D L
2667973
CYLINDER & LINES GP-STICK
320D, 320D LN, 320D LRR, 320D2 L, 323D L
320D, 320D LN, 320D LRR, 320D2 L, 323D L
3306, 3306C
424D, 428C, 428D, 432D, 438C, 438D, 442D
1382289
CYLINDER GP-COUPLER
902, 904B, 904H, 906
902, 904B, 904H, 906
1839026
CYLINDER & SEAL GP-STICK
M322C, M322D, M322D MH
M322C, M322D, M322D MH
3492515
CYLINDER GP-LIFT
966K, 966M, 966M XE, 972K, 972M, 972M XE
966K, 966M, 966M XE, 972K, 972M, 972M XE