AVSPARE.COM
parts catalog

CYLINDER GP-STEERING 2673863 - Caterpillar


2673863 CYLINDER GP-STEERING Caterpillar parts 16M
Rating:
81
Alternative (cross code) number:
CA2673863
267-3863
2673863
Caterpillar 2673863 CYLINDER GP-STEERING
Weight: 65 pounds 29 kg.

Buy CYLINDER GP-STEERING 2673863 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 2673863:

MOTOR GRADER  16M   Caterpillar
Number on catalog scheme: 5
  For full view, you need register

Information:


Illustration 1 g01329611
Depth Mode Memory Indicator (12) Target Depth (13) Memory IndicatorDepth memories are calculated from the Benchmark as shown in Illustration 2.
Illustration 2 g01329615
Depth Memories from BenchmarkTo Select a Memory
In order to select a memory, perform the following procedure.
Toggle the "Memory Focus" switch to the right position.
Press the "Memory Advance" button until you get to the desired memory. The memory indicator located on the display will increment each time the "Memory Advance" button is pressed.Store a Target Depth Value to Memory
When you use the "Depth Adjust" switch, the switch changes the information that is displayed on the screen as well as the information that is stored in the corresponding memory.In order to store a "Target Depth", perform the following procedure.
Press the "Memory Advance" button until you get to the desired memory.
Do one of the following:To increment the "Target Depth" value, toggle the "Depth Adjust" switch up until you reach the desired elevation. This value will be stored in the selected memory.To decrement the "Target Depth" value, toggle the "Depth Adjust" switch down until you get to the desired elevation. This value will be stored in the selected memory.Set Memory Depth Value to Zero
In order to set a Target Depth value to zero, perform the following procedure.
Press the "Memory Advance" button until you get to the desired memory.
Press and hold the "Memory Advance" button for 2 seconds.Using Touch-Point
The Touch-Point feature is often used in order to move the machine from one location to another when there is no laser catcher configured. This feature is only available after the system has been benched and requires a common touch point, such as a rock, to be accessible from both locations. This activity effectively transfers the zero (bench) depth from one working location to another, as shown in Illustration 3.
Illustration 3 g01329653
Touch-Point a DepthIn order to use Touch-Point, perform the following procedure.
Ensure that the system has been benched.
Position the bucket teeth on a common touch point (rock).
Press the "Touch-Point" button for 2 seconds. A message that is similar to Illustration 4 will appear.
Illustration 4 g01329659
The system is frozen in this state.
In order to release the machine from the frozen state, reposition the machine, then place the bucket tip on the same common touch point.
Press the "Touch-Point" button.
The Display should momentarily blink the message "Position Updated" and return to the normal Depth Mode screen.You will now be working to the same zero depth (bench) before the machine was repositioned.Using a Laser
An optional laser catcher can be added to the system.Setting up the Laser Transmitter
Before you set up the equipment consider the size, shape, and elevation of the equipment area. This will help to determine the number of laser setups that are needed. Refer to the laser transmitter's operation manual for information on the maximum area that is covered by the transmitter.Caterpillar recommends the use of a laser transmitter with the following features:
Automatic Self-Leveling Mode
600 rpm min rotational Speed
Automatic Out of Level Shutoff Mount the laser transmitter at a height that allows the laser catcher to detect

Caterpillar parts catalog:

Caterpillar parts catalog
16M Motor Grader B9H00001-UP (MACHINE) POWERED BY C13 Engine
16M Motor Grader R9H00001-UP (MACHINE) POWERED BY C13 Engine


Parts cylinder Caterpillar catalog:

1135264 CYLINDER GP-RIPPER
14H, 14H NA, 14M, 16H, 16H NA, 16M
9T8944 CYLINDER GP-BLADE TIP
14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M
3453752 CYLINDER HEAD AS
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 621H, 621K, 623H, 623K LRC, 627H, 627K LRC, 725, 730, 730C, 966H, 972H, 980C, C11, C13, CX31-C13I, D8N, R1600H, R1700G, RM-300, ...
3086358 CYLINDER HEAD AS
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 349D L, 725, 730, 966H, 972H, C11, C13, CX31-C13I, D8N, R1700G, RM-300, TH35-C13I, W345C MH
3562069 CYLINDER HEAD GP
16M, 621H, 621K, 623H, 623K LRC, 627H, 627K LRC, 730, 730C
3312477 CYLINDER HEAD GP
16M, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 627H, 627K, 730C, 980K, 980K HLG, 980M, 982M, C13, CX31-C13I
3031383 CYLINDER BLOCK AS
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 621H, 621K, 623H, 623K LRC, 627H, 627K LRC, 725, 730, 966H, 972H, 980C, 980K, 980K HLG, C11, C13, C13 XQ350, CX31-C13I, D8N, R16...
1802870 CYLINDER BLOCK GP
966H, 972H, C11, C13, CX31-C13I
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.