2717760 CYLINDER GP-SIDESHIFT Caterpillar parts
428E, 432E, 434E, 442E, 444E
Rating:
Alternative (cross code) number:
CA2717760
271-7760
2717760
CA2717760
271-7760
2717760
Weight: 32 pounds 14 kg.
Information:
BORE DIAMETER
63
mm
CLOSED LENGTH
750
mm
PIN SIZE CAP END
30
mm
PIN SIZE ROD EYE
30
mm
ROD DIAMETER
40
mm
STROKE
500
TYPE
THD GLAND
BACKHOE LOADER,
Number on catalog scheme:
4
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite Gasket Sealant No.2 -
B - Loctite C5-A Copper Anti-Seize -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Use a new gasket to install the aftercooler.
Illustration 1 g00746356Note: Apply Tooling (A) to the threads of the bottom bolts before installation.
Install gasket (9) on the engine. Install aftercooler (10). Install bolts (8).
Tighten clamp (6) and tighten clamp (7).
Illustration 2 g00746355
Tighten clamp (4).
Connect coupling (5).
Illustration 3 g00508837
Illustration 4 g00508835Note: Apply Tooling (B) to the threads of the exhaust elbow bolts.
Install exhaust elbow (1) and exhaust pipe (3). Install bolts (2).
Fill the cooling system. Refer to Operation and Maintenance Manual, SEBU7098, "Cooling System Level - Check" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite Gasket Sealant No.2 -
B - Loctite C5-A Copper Anti-Seize -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Use a new gasket to install the aftercooler.
Illustration 1 g00746356Note: Apply Tooling (A) to the threads of the bottom bolts before installation.
Install gasket (9) on the engine. Install aftercooler (10). Install bolts (8).
Tighten clamp (6) and tighten clamp (7).
Illustration 2 g00746355
Tighten clamp (4).
Connect coupling (5).
Illustration 3 g00508837
Illustration 4 g00508835Note: Apply Tooling (B) to the threads of the exhaust elbow bolts.
Install exhaust elbow (1) and exhaust pipe (3). Install bolts (2).
Fill the cooling system. Refer to Operation and Maintenance Manual, SEBU7098, "Cooling System Level - Check" for the correct procedure.
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, TH560B, TH580B
416E, 416F, 422E, 428E
420D, 420E, 428D, 428E, 430D, 430E, 432D, 432E, 438D, 442D, 442E
416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 517, 527
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, AP-650B, AP-800D, CB-534D, CB-564D, CP-433E, CP-533E, CS-533E, PS-150C, PS-360C
414E, 416B, 416C, 416D, 416E, 420D, 422E, 424D, 426, 426C, 428, 428B, 428C, 428D, 428E, 430D, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E, 902, 904B, 904H, 906, 906H, 906H2, 907H, 907H2, 908H...
422E, 424D, 428B, 428C, 428D, 428E, 432D, 432E, 434E, 438B, 438C, 438D, 442D, 442E, 444E
414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 442D, 442E
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, CP-533E, CP-54B, CP-56, CS-533E, CS-54, CS-54B, CS-56, CS-563D, CS-563E, CS-56B, TH560B, TH5...
416E, 422E, 428E, 432E, 434E
416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 527
422E, 428E, 432E, 434E, 442E, 444E
2120465
CYLINDER AS
432E, 434E
432E, 434E
2120469
CYLINDER AS
432E, 434E
432E, 434E
2151514
CYLINDER AS
420E, 428E, 430E, 432E, 442E
420E, 428E, 430E, 432E, 442E
3043271
CYLINDER HEAD
432E, 434E, 442E, 444E
432E, 434E, 442E, 444E
2176244
CYLINDER AS
430E, 430F
430E, 430F
2176238
CYLINDER AS
430E
430E
2230188
CYLINDER AS
434E
434E
2230174
CYLINDER AS
434E
434E
2531139
CYLINDER AS
434E
434E
434E, 444E, 450E, 450F
2385285
CYLINDER GP-STEERING
434E, 444E, 450E, 450F
434E, 444E, 450E, 450F
2717759
CYLINDER GP-SIDESHIFT
428E, 432E, 434E, 442E, 444E
428E, 432E, 434E, 442E, 444E