CYLINDER GP-HOIST 2960738 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 421-5662 Lifting Eye Assembly 2
189-0408 Shackle As 2 Start By:
Remove the auxiliary control valve.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03330120
Disconnect hose assembly (1). Disconnect hose assemblies (2).
Illustration 2 g03330121
Disconnect hose assemblies (3).
Illustration 3 g03330122
Disconnect hose assemblies (4).
Illustration 4 g03330124
Disconnect hose assemblies (5).
Illustration 5 g03330125
Disconnect harness assemblies (6).
Illustration 6 g03330127
Disconnect hose assemblies (7). Disconnect hose assembly (8).
Illustration 7 g03330128
Disconnect hose assemblies (9).
Illustration 8 g03330129
Remove fittings (10).
Illustration 9 g03330130
Attach Tooling (A) and a suitable lifting device to main control valve (11). The weight of main control valve (11) is approximately 104 kg (230 lb).
Illustration 10 g03330311
Illustration 11 g03330317
Remove bolts (12).
Use Tooling (A) and the suitable lifting device in order to remove main control valve (11). Installation Procedure
Install main control valve (11) in the reverse order of removal.