CYLINDER HEAD AS 2984526 - Caterpillar

2. Disconnect oil line (1) from the torque converter outlet relief valve.3. Remove the bolts and torque converter relief valve (2) from the torque converter. The following steps are to install the torque converter outlet relief valve.4. Inspect and make a replacement of the seals if necessary.5. Put torque outlet relief valve in position on the torque converter and install the bolts.6. Connect oil line (1) to the torque converter.7. Fill the torque converter to the correct level.Disassemble Torque Converter Outlet Relief Valve
1. Remove seals (1) from torque converter outlet relief valve (2). 2. Remove the bolts and cover (3) from the valve group. 3. Remove valve spool (7) from the valve group.4. Remove spring (6) and spacers (5) from valve spool (7).5. Remove seal (4) from the valve group. 6. Remove ring (11), retainer (10), spring (9) and poppet (8) from valve spool (7). 7. If necessary remove the bolts, cover (12) and the seal from the valve group.Assemble Torque Converter Outlet Relief Valve
1. Put seal (1) in position on torque converter outlet relief valve (3) and install cover (2). 2. Install poppet (5), spring (6), retainer (7) and ring (8) in valve spool (4) as shown. Make sure the shoulder on retainer (7) is toward spring (6) when it is installed. 3. Install spacers (10) and spring (11) in valve spool (4).4. Install valve spool (4) in the valve group. Spacers (10) are used to make an adjustment to the pressure needed to open the torque converter relief valve. See POWER SHIFT TRANSMISSION TESTING AND ADJUSTING for the correct pressure setting.5. Put seal (9) in position on the valve group. 6. Install cover (12) on the valve group. 7. Install seals (13) on the valve group as shown.END BY:a) install torque converter outlet relief valve