CYLINDER HEAD GP 3005527 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     5P-7433     Valve Lifter Tool Group     1    Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00571490
Illustration 2 g00571491
Install Tooling (A) in lifter assembly (1) .
Remove lifter assembly (1) from the lifter bore.
Illustration 3 g00571492
Remove lifter guide spring (2) from the lifter assembly.Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     5P-7433     Valve Lifter Tool Group     1    Note: Install new valve lifter guide springs on the valve lifter when the valve lifters are removed from the engine.Note: Apply clean engine oil to the ball socket for the pushrod and the bore for the valve lifter assembly.
Illustration 4 g00571513
Make an alignment of the new lifter guide spring (2) in Tooling (A) .
Illustration 5 g01104989
Install lifter assembly (1) in the cylinder block with Tooling (A) .End By: Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install".