CYLINDER HEAD AS 3022297 - Caterpillar

Main Hydraulic Schematic
Illustration 1 g01417078
(1) Swing motor (2) Left travel motor (3) Right travel motor (4) Stick cylinder (5) Boom cylinders (6) Bucket cylinder (7) Swivel (8) Main control valve (9) Implement pressure switch (10) Pilot control valve (travel) (11) Main relief valve (12) Pilot control valve (swing and stick) (13) Pilot control valve (boom and bucket) (14) Shuttle valve (15) Travel pressure switch (16) Pressure reducing valve for boom priority (17) Bypass check valve (18) Slow return check valve (19) Swing brake solenoid valve (20) Valve (21) Hydraulic activation solenoid valve (22) Pressure sensor (23) Oil cooler (24) Accumulator (25) Idler pump (26) Pilot pump (27) Drive pump (28) Travel speed solenoid valve (29) Pilot relief valve (30) Pilot manifold (31) Hydraulic tank (32) Drain filter (33) Pilot filter (34) Pressure sensorHydraulic Pump Flow
Illustration 2 g01423190
Pump compartment (25) Idler pump (26) Pilot pump (27) Drive pump (35) Outlet line (idler pump) (36) Outlet line (drive pump)
Illustration 3 g00802786
Control valve (11) Main relief valve (37) Left side of the control valve body (38) Right side of the control valve bodyThis machine is driven and controlled by the following systems.
The main hydraulic system controls the cylinders, the travel motors, and the swing motor.
The pilot hydraulic system supplies oil to the main pumps, the main control valve, the swing brake, and the travel motors.
The Machine ECM controls the outputs of the engine and pump.The main hydraulic system delivers oil flow from idler pump (25) and drive pump (27) in order to control the following components: bucket cylinder (6), stick cylinder (4), boom cylinders (5), right travel motor (3), left travel motor (2) and swing motor (1) .Idler pump (25) and drive pump (27) are variable displacement piston pumps. The performance of both pumps is equal.Drive pump (27) is directly connected to the engine by a flexible coupling. The drive pump delivers oil to the right side (38) of the control valve body of the main control valve. Idler pump (25) is mechanically connected to the drive pump through gears. The idler pump delivers oil to the left side (37) of the control valve body of the main control valve. Pilot pump (26) supplies oil to the pilot hydraulic system. Pilot pump (26) is directly connected to idler pump (25) by a coupling. All engine output is used to drive these three pumps.As the load pressure increases during working conditions, the delivery pressure increases and the oil flow rate decreases. The hydraulic horsepower remains constant even though the delivery pressure and the flow rates change. The hydraulic horsepower is approximately identical to the engine horsepower.When no work is being performed, pump oil flows through main control valve (8) back to hydraulic tank (31). The main control valve sends a negative flow control signal to each main pump regulator in order to destroke the pump to the minimum output flow.If an operation is being performed, main control valve (8) directs pump oil to the respective cylinders (boom, bucket, and stick) and/or motors (swing and