CYLINDER AS 3084200 - Caterpillar

Illustration 2 g02819117
Mixing alcohol or gasoline with diesel fuel can produce an explosive mixture in the engine crankcase or fuel tank.Personal injury and damage to the engine may result. Prentice recommends against this practice.
There are many different types of fuel additives that are available to use. Prentice does not generally recommend the use of fuel additives.Refer to Operation and Maintenance Manual, SEBU6250, "Caterpillar Machine Fluids Recommendations" for the use of fuel additives and fuel conditioners.Cab Tilt Pump (2) Your machine is equipped with a cab tilt pump, this additional message is located inside the fuel fill door.
Illustration 3 g02819381
The cab tilt pump is installed to aide in tilting the cab when maintenance or repair needs to be performed on components underneath the cab.Air Conditioner (3) This message is located on the left side of the front instrument panel.
Illustration 4 g02665985
This message for the air conditioner has the appropriate information for the following services: the air conditioner lubricant, the refrigerant charge and the refrigerant capacity.Follow instruction in order to avoid engine damage.ReferenceSee Operation and Maintenance Manual, "Maintenance Interval Schedule" for all maintenance recommendations.Alternate Exit (4) Two messages are located on both side windows of the cab.
Illustration 5 g01422244
Alternate exitWindow Cleaning (5) Two messages are located on both side windows of the cab.
Illustration 6 g00930685
ReferenceFor more information, refer to Operation and Maintenance Manual, "Windows - Clean".Fire Points (Engine) (6)
Illustration 7 g02095974
This message describes the fire points that are available on the engine compartments. Use the apertures in order to suppress fire hazards in the engine compartment.Do not use an unsafe method in order to suppress fire hazards in the engine compartment.Tie-Downs (7)
Illustration 8 g02666217
Illustration 9 g02666219
Rear Frame Tie Down Area
Illustration 10 g02666225
Front Frame Tie Down AreaAlso, two locations on each of the front and rear axles are for tying down the machine or towing the machine. Do not use these tie-downs to lift the machine.Lifting Points (8)
Illustration 11 g02666221
Lift Area FilmRead "Towing the Machine" and "Lifting and Tying Down the Machine" in this manual for more information.Product Link (9) If your machine is equipped with the Product Link System, this additional message is located in the cab on the right-hand counsel.
Illustration 12 g01418953
The Product Link System is a satellite or cellular communication device that transmits information regarding the machine back to Prentice and Prentice dealers and customers. All logged events and diagnostic codes that are available to the Prentice Electronic Technician (ET) can be sent to satellite or cellular tower. Information can also be sent to the Product Link System. The information is used to improve Prentice products and Prentice services.