CYLINDER HEAD AS 3096663 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
1/2 - 13 NC by 5 inch 2
Illustration 1 g01221066
Illustration 2 g01221078
Remove V-belt (1) from the engine.
Remove two bolts (2) and install Tooling (A).
Remove remaining bolts (2) and pulley (3).
Slide vibration damper (4) along Tooling (A).
Attach a suitable lifting device onto vibration damper (4). The weight of vibration damper (4) is approximately 34 kg (75 lb). Remove vibration damper (4) from the adapter. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
1/2 - 13 NC by 5 inch 2
Illustration 3 g01221078
Illustration 4 g01221066
Install Tooling (A) in the adapter.
Attach a suitable lifting device onto vibration damper (4). The weight of vibration damper (4) is approximately 34 kg (75 lb). Position vibration damper (4) on the adapter.
Install pulley (3) and bolts (2).
Remove Tooling (A). Install remaining bolts (2). Tighten bolts (2) to a torque of 135 20 N m (100 15 lb ft).
Install V-belt (1) on the engine.