CYLINDER GP-BOOM 3119515 - Caterpillar

Illustration 1 g02862078
Table 1
Specification for 333-6437 Oil Filter Gp    
Item     Qty     Part     Specification Description    
-     -     -     Bypass valve pressure setting is 520 21 kPa (75 3 psi).    
1     1     8C-3446 Fluid Sampling Valve     Torque to
11 to 13 N m (97 to 115 lb in).    
2     1     164-7577 Bypass Switch Gp     Torque to
80 10 N m (59 7 lb ft).    
3     1     334-2679 Spring     Length under test force is
57.57 mm (2.267 inch).    
Test force is
179.53 8.98 N (40.36 2.02 lb).
Free length after test is
85.6 mm (3.37 inch).
4     1     334-2680 Spring     Length under test force is
57.57 mm (2.267 inch).    
Test force is
98.67 4.93 N (22.18 1.11 lb).
Free length after test is
68.2 mm (2.69 inch).
5     1     130-0229 O-Ring Seal     Lubricate the lip type seal lightly with the lubricant that is being sealed.    
A     -     -     Minimum bottom clearance that is required to remove the filter housing is
35.0 mm (1.38 inch).
Do not use an air wrench to tighten the filter.