3131964 CYLINDER HEAD GP Caterpillar parts
3011C, C1.1, CB-14
Rating:
Alternative (cross code) number:
CA3131964
313-1964
3131964
CA3131964
313-1964
3131964
INDUSTRIAL ENGINE, VIBRATORY COMPACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Hacus - Forklift FPE357815 Bearing Ball Single Seal Hacus Aftermarket - New
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Hacus - Forklift FPE357815 BEARING BALL SINGLE SEAL Hacus Aftermarket - New
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 3131964:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
If the engine has guards, remove the guards. Refer to the Original Equipment Manufacture (OEM) for the correct procedure. Note: Mark the direction of rotation of the alternator belt if the belt will be reused.
Illustration 1 g02017213
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
Illustration 2 g02017213
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Ensure that the belt tensioner, pulleys, and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt.
Ensure that all components of the belt tensioner, pulleys, and guide rollers are clean and free from wear and damage. If necessary, replace any components that are worn or damaged. Refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Flat Idler Pulley) - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Grooved Idler Pulley) - Remove and Install" for the correct procedure.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the grooves of all pulleys.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
If the engine has guards, remove the guards. Refer to the Original Equipment Manufacture (OEM) for the correct procedure. Note: Mark the direction of rotation of the alternator belt if the belt will be reused.
Illustration 1 g02017213
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
Illustration 2 g02017213
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Ensure that the belt tensioner, pulleys, and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt.
Ensure that all components of the belt tensioner, pulleys, and guide rollers are clean and free from wear and damage. If necessary, replace any components that are worn or damaged. Refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Flat Idler Pulley) - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Grooved Idler Pulley) - Remove and Install" for the correct procedure.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the grooves of all pulleys.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Caterpillar SIS machinery equipment:
Caterpillar SIS
CB14 Vibratory Utility Compactor DTT00001-UP (MACHINE) POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
CB34B Compactor 42300001-UP (MACHINE) POWERED BY C2.2 Engine »
313-1964
CYLINDER HEAD GP
CB34B XW Compactor 42500001-UP (MACHINE) POWERED BY C2.2 Engine »
313-1964
CYLINDER HEAD GP
CC34B Compactor 32400001-UP (MACHINE) POWERED BY C2.2 Engine »
313-1964
CYLINDER HEAD GP
CB34B Compactor 3B400001-UP (MACHINE) POWERED BY C2.2 Engine »
313-1964
CYLINDER HEAD GP
CC34B Compactor CC300001-UP (MACHINE) POWERED BY C2.2 Engine »
313-1964
CYLINDER HEAD GP
CB34B XW Compactor JTX00001-UP (MACHINE) POWERED BY C2.2 Engine »
313-1964
CYLINDER HEAD GP
CB36B Compactor M3600001-UP (MACHINE) POWERED BY C2.2 Engine »
313-1964
CYLINDER HEAD GP
DE9.5E3 Generator Set TYB00001-UP POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
CB1.8 Vibratory Utility Compactor ERX00001-UP (MACHINE) POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
CB1.7 Vibratory Utility Compactor HRB00001-UP (MACHINE) POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
301.7CR Mini Hydraulic Excavator JH700001-UP (MACHINE) POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
301.5 Mini Hydraulic Excavator MNH00001-UP (MACHINE) POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
302 CR Mini Hydraulic Excavator RHM00001-UP (MACHINE) POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
CB1.8 Vibratory Utility Compactor 64400001-UP (MACHINE) POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
CB1.7 Vibratory Utility Compactor 64300001-UP (MACHINE) POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
3011C Industrial Engine 31100001-UP »
313-1964
CYLINDER HEAD GP
C1.1 Industrial Engine C3M00001-UP »
313-1964
CYLINDER HEAD GP
C1.1 Industrial Engine C6L00001-UP »
313-1964
CYLINDER HEAD GP
C1.1 Industrial Engine G8N00001-UP POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
C1.1 Industrial Engine C7Y00001-UP »
313-1964
CYLINDER HEAD GP
C1.1 350-3712 C6L00001-UP »
313-1964
CYLINDER HEAD GP
216B3 Skid Steer Loader HR200001-UP (MACHINE) POWERED BY C2.2 Engine »
313-1964
CYLINDER HEAD GP
DE9.5E3 Generator Set GB800001-UP POWERED BY C1.1 Engine »
313-1964
CYLINDER HEAD GP
Cat SIS web machinery list:
Parts cylinder Caterpillar catalog:
3131957
CYLINDER BLOCK GP
3011C, C1.1, CB-14
3011C, C1.1, CB-14
3011C, C1.1, CB-14
3111099
CYLINDER BLOCK GP
3013C, C1.1, C1.5, C2.2, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
3013C, C1.1, C1.5, C2.2, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
3013C, C1.1, C1.5, C2.2, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
2690676
CYLINDER BLOCK GP
3011C, C1.1
3011C, C1.1
2346036
CYLINDER BLOCK GP-LONG
3011C, C1.1
3011C, C1.1
2464340
CYLINDER BLOCK GP-LONG
3011C, C1.1
3011C, C1.1
2690691
CYLINDER HEAD GP
3011C, C1.1
3011C, C1.1
2045736
CYLINDER GP-HYDRAULIC
PM-201, PM-465, PM-565B, RM-350B
PM-201, PM-465, PM-565B, RM-350B
1649430
CYLINDER GP-HYDRAULIC
902, 906, 906H, 907H, 908, 908H
902, 906, 906H, 907H, 908, 908H
2608709
CYLINDER & MTG GP-STEERING
120M, 120M 2, 12M 2, 140M, 140M 2, 160M, 160M 2
120M, 120M 2, 12M 2, 140M, 140M 2, 160M, 160M 2
1559067
CYLINDER & SEAL GP-BOOM
385B, 385C, 385C L
385B, 385C, 385C L
2831273
CYLINDER HEAD AS
303.5C, 303C CR, 304D CR
303.5C, 303C CR, 304D CR
1564145
CYLINDER GP-DELIMBING KNIFE
HH55, HH65, HH75
HH55, HH65, HH75
311C, 312C, 312C L, 314C, 315C
6E0365
CYLINDER GP-LIFT
517, D4HTSK II, D4HTSK III
517, D4HTSK II, D4HTSK III
2500414
CYLINDER BLOCK GP
3054B, 416D, 424D, CS-423E, TH210, TH215
3054B, 416D, 424D, CS-423E, TH210, TH215
2536947
CYLINDER & MTG GP-MULCHING HD
256C, 262C, 272C, 277C, 287C, 297C, HM312, HM315
256C, 262C, 272C, 277C, 287C, 297C, HM312, HM315