CYLINDER GP-SWING 3197198 - Caterpillar

Illustration 1 g03716376
Table 1
Specification for 425-2911 Stick Cylinder Gp    
Item     Qty     Part     Specification Description    
All bores must be free of paint. Use lubricant in order to coat all bores for the pins.    
1     2     Bushing     Bore, after assembly is 55.05 to 55.25 mm (2.167 to 2.175 inch).    
2     1     3B-8489 Grease Fitting     Torque to
9.32 4.90 N m (82.49 43.37 lb in).    
3     1     Connector     Torque to
100 to 120 N m (74 to 89 lb ft).    
4     1     6V-6317 Bolt     Torque to
31.5 5.9 N m (278.8 52.2 lb in).    
5     1     451-5084 Head     Before assembly, lubricate the threads lightly with clean oil.
Torque to
510 50 N m (376 37 lb ft).    
B     1     451-5083 Rod As     Diameter is
60.0 mm (2.36 inch).    
C     1     451-5085 Cylinder As     Bore is
95.0 mm (3.74 inch).    
6     1     451-5091 Nut     Torque to
2058 N m (1518 lb ft).    
7     1     Setscrew     Torque to
31.5 5.9 N m (278.8 52.2 lb in).    
8     -     -     Before assembly, apply green Loctite 648 to the wiper seal groove.    
9     -     -     Lubricate the sealing lip lightly with the lubricant that is being sealed.