3198276 CYLINDER GP-STICK Caterpillar parts
336E L
Rating:
Alternative (cross code) number:
CA3198276
319-8276
3198276
CA3198276
319-8276
3198276
EXCAVATOR,
Compatible equipment models: 3198276:
Number on catalog scheme:
3
For full view, you need register
Information:
Walk-Around Inspection
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
For your own safety and maximum service life of the machine, make a thorough walk-around inspection before mounting the machine to start the engine.Look around and under the machine for such items as loose bolts, trash build-up, oil or coolant leaks, broken or worn parts. Inspect the condition of the implements and the hydraulic components. 1. Inspect the implements for damage or excessive wear. Repair if damaged. 2. Inspect implement cylinders, lines, and linkage for damage or excessive wear. Repair if damaged.3. Inspect and replace lights, broken bulbs and lenses. 4. Remove trash build-up in and around the engine and under the floorplate. Also remove any dirt build-up on top of the crankcase guard.5. Inspect and repair any cooling system leaks. Check the hoses, radiator fins, radiator cap and the drain area. 6. Inspect the engine precleaner screen for dirt build-up. Remove any dirt or debris. When the engine filter element indicator enters the red zone, see "Air Intake System" in the "When Required" section of this guide.7. Inspect and repair any engine compartment leaks. Check around all seals and covers.8. Inspect steps and handholds for condition and cleanliness. Repair or clean if necessary. Inspect the Rollover Protective Structure (ROPS) for damage. See your Caterpillar dealer for repairs if necessary. 9. Inspect and repair any hydraulic system leaks. Inspect hoses, seals and around flanges.10. Inspect and repair any final drive leaks. 11. Be sure covers and guards are firmly in place. Inspect for damage or for loose and missing bolts.12. Inspect and repair any transmission leaks. Check around the seals and covers. Also, check the hoses around the transmission.13. Inspect and repair damaged and excessively worn tracks. Tighten any loose bolts and replace any that are missing. 14. Inspect operator's compartment for cleanliness and remove all trash and dirt build-up.15. Inspect and repair the instrument panel when broken gauges and lights are found. 16. Inspect the seat belt and mounting for excessive wear and damage. Replace if damaged. 17. Make sure the horn, back-up alarm, lights, guards, shield, etc., are in proper working order.Contact your Caterpillar dealer for service or replacement instructions.Pre-Start Checks
Do pre-start checks with all implements lowered to ground and blade in non-angled position. 1. Maintain the engine oil level between the ADD and the FULL marks
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
For your own safety and maximum service life of the machine, make a thorough walk-around inspection before mounting the machine to start the engine.Look around and under the machine for such items as loose bolts, trash build-up, oil or coolant leaks, broken or worn parts. Inspect the condition of the implements and the hydraulic components. 1. Inspect the implements for damage or excessive wear. Repair if damaged. 2. Inspect implement cylinders, lines, and linkage for damage or excessive wear. Repair if damaged.3. Inspect and replace lights, broken bulbs and lenses. 4. Remove trash build-up in and around the engine and under the floorplate. Also remove any dirt build-up on top of the crankcase guard.5. Inspect and repair any cooling system leaks. Check the hoses, radiator fins, radiator cap and the drain area. 6. Inspect the engine precleaner screen for dirt build-up. Remove any dirt or debris. When the engine filter element indicator enters the red zone, see "Air Intake System" in the "When Required" section of this guide.7. Inspect and repair any engine compartment leaks. Check around all seals and covers.8. Inspect steps and handholds for condition and cleanliness. Repair or clean if necessary. Inspect the Rollover Protective Structure (ROPS) for damage. See your Caterpillar dealer for repairs if necessary. 9. Inspect and repair any hydraulic system leaks. Inspect hoses, seals and around flanges.10. Inspect and repair any final drive leaks. 11. Be sure covers and guards are firmly in place. Inspect for damage or for loose and missing bolts.12. Inspect and repair any transmission leaks. Check around the seals and covers. Also, check the hoses around the transmission.13. Inspect and repair damaged and excessively worn tracks. Tighten any loose bolts and replace any that are missing. 14. Inspect operator's compartment for cleanliness and remove all trash and dirt build-up.15. Inspect and repair the instrument panel when broken gauges and lights are found. 16. Inspect the seat belt and mounting for excessive wear and damage. Replace if damaged. 17. Make sure the horn, back-up alarm, lights, guards, shield, etc., are in proper working order.Contact your Caterpillar dealer for service or replacement instructions.Pre-Start Checks
Do pre-start checks with all implements lowered to ground and blade in non-angled position. 1. Maintain the engine oil level between the ADD and the FULL marks
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
3460485
CYLINDER HEAD GP
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2864C, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL, 586C, 627H, 627K, 627K LRC, 725C, 966K, 966...
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2864C, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL, 586C, 627H, 627K, 627K LRC, 725C, 966K, 966...
2777260
CYLINDER BLOCK GP
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2864C, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL, 586C, 627H, 627K, 627K LRC, 725C, 966K, 966...
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2864C, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL, 586C, 627H, 627K, 627K LRC, 725C, 966K, 966...
330D L, 336D, 336D L, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D2 L, 345C, 345D, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
3574701
CYLINDER & LINES GP-STICK
336E, 336E L, 336E LH, 336E LN, 336F L
336E, 336E L, 336E LH, 336E LN, 336F L
3585969
CYLINDER & LINES GP-BOOM
336E, 336E L, 336E LH, 336E LN, 336F L
336E, 336E L, 336E LH, 336E LN, 336F L
3585972
CYLINDER GP-BOOM
330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 568 FM LL
330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 568 FM LL
3579766
CYLINDER GP-BUCKET
324D, 324D L, 324E, 324E L, 324E LN, 325D L, 329D, 329D L, 329E, 329E L, 329E LN, 330D L, 336D, 336D L, 336D LN, 336D2, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 568 FM LL
324D, 324D L, 324E, 324E L, 324E LN, 325D L, 329D, 329D L, 329E, 329E L, 329E LN, 330D L, 336D, 336D L, 336D LN, 336D2, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 568 FM LL
3579765
CYLINDER & SEAL GP-BUCKET
324D, 324D L, 324E, 324E L, 324E LN, 325D L, 329D, 329D L, 329E, 329E L, 329E LN, 330D L, 336D, 336D L, 336D2, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 568 FM LL
324D, 324D L, 324E, 324E L, 324E LN, 325D L, 329D, 329D L, 329E, 329E L, 329E LN, 330D L, 336D, 336D L, 336D2, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 568 FM LL
3030703
CYLINDER GP-COUPLER
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 374D L, PIN GRAB
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 374D L, PIN GRAB
120G, 120H, 120H ES, 120H NA, 120M 2, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 14M, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 16M, 205B...
325D L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 385C L, 568 FM LL
8U4850
CYLINDER GP
205B, 206B
205B, 206B
2742679
CYLINDER & LINES GP-BLADE
311D LRR, 312D, 312D L, 314D LCR
311D LRR, 312D, 312D L, 314D LCR
3618221
CYLINDER & LINES GP-BOOM
314E CR, 314E LCR
314E CR, 314E LCR
3260413
CYLINDER & LINES GP-BUCKET
336E, 336E H, 336E L, 336E LH, 336E LN, 336F L
336E, 336E H, 336E L, 336E LH, 336E LN, 336F L
2836173
CYLINDER & LINES GP-BOOM
311D LRR
311D LRR
3624125
CYLINDER & LINES GP-BOOM
314E CR, 314E LCR
314E CR, 314E LCR
3624124
CYLINDER & LINES GP-BOOM
314E CR, 314E LCR
314E CR, 314E LCR
8U9179
CYLINDER GP
212B
212B
2111327
CYLINDER GP-FRAME LEVELING
TH460B, TH560B, TH580B
TH460B, TH560B, TH580B